Masonry Anchor, Hex Washer Head, Type 410 Stainless Steel, Stalgard Coated, #14-10 x 1-1/4"
(Pack of
25)
SKU:59655 Item#: 59655
• Type 410 Stainless Steel anchors that cut threads into poured concrete, brick or hollow brick
• Fast installation – drill hole, drive anchor
• Available in two head styles – hex washer head for most applications and Phillips flat head for countersunk applications
• Stalgard®-coated for superior corrosion resistance
To determine the proper length of Crete-Flex™ anchor for an application, combine the thickness of the attachment (A) with the desired depth of embedment in the masonry material (B). It is recommended that embedment never be less than 1", nor greater than 1-3/4".
NOTE: Use system drill bits. Use of any other drill bits will cause inconsistent performance of the anchors. Drill bits must be ordered separately.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
Conical Screw Anchor Kit Plastic 101Pcs
Couldn't load pickup availability
E-Z Anchor Kit Steel 41Pcs
Couldn't load pickup availability
Conical Screw Anchor Kit Plastic 201Pcs
Couldn't load pickup availability
DIN 125A Flat Washer Grade 140 HV M10
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 1/4"
Couldn't load pickup availability
Open End Rivet Dome Head Aluminum 3/16"
Couldn't load pickup availability
Drill 'N Drive Masonry Anchor Setting Tool
Couldn't load pickup availability
Masonry Anchor Hex Washer Head Steel 3/16 x 1-1/4"
Couldn't load pickup availability
Drill 'N Drive Anchor Masonry Anchor Drill Bit
Couldn't load pickup availability
Front Bumper Trim Panel/Running Board Split Rivet
Couldn't load pickup availability
Bumper Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Product Description
• Type 410 Stainless Steel anchors that cut threads into poured concrete, brick or hollow brick• Fast installation – drill hole, drive anchor
• Available in two head styles – hex washer head for most applications and Phillips flat head for countersunk applications
• Stalgard®-coated for superior corrosion resistance
To determine the proper length of Crete-Flex™ anchor for an application, combine the thickness of the attachment (A) with the desired depth of embedment in the masonry material (B). It is recommended that embedment never be less than 1", nor greater than 1-3/4".
NOTE: Use system drill bits. Use of any other drill bits will cause inconsistent performance of the anchors. Drill bits must be ordered separately.
Technical Specifications
| Item#: | 59655 |
|---|---|
| Diameter | #14 |
| Length | 1-1/4 " |
| Type | Crete-Flex |
| Material | Stainless Steel |
| Finish | Plain |
| Thread Pitch | 10 tpi |
| Drive | Hex |
| Head Style | Hex Washer Head |
| Drive Style | Hex |
| UNSPSC #: | 31162104 |
| TAA Compliant: | Yes |
| Weight: | 0.38 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
