Masonry Anchor Hex Washer Head Steel 5/16 x 4"
(Pack of
50.0)
UltraCon+® Anchors and Drill Bits
• Fast installation – drill hole, drive anchor
• Anchors available in three head styles: Slotted hex washer head for most applications; Phillips flat head provides flush seating for countersunk applications; 5/16" hex washer head has an oversized (0.540") washer face
• Replaces expansion anchors, plugs and screws
• Hi-Lo threads provide exceptional holding strength with no spalling
• Notched cutting edges for easy installation – cuts threads into poured concrete, brick or hollow block
• Gimlet point for self drilling into wood base material
• Reversible and removable
• Stalgard®-coated for superior corrosion resistance – withstands a minimum of 800 hours of neutral salt-spray testing without evidence of red rust on significant surfaces
• Carbide-Tipped UltraCon® Masonry Hammer Drill Bits are required – these bits are special size and tolerance products; use of any other bit will cause inconsistent performance of the anchor (sold separately)
5/16" dia. UltraCon® Anchors have a silver Stalgard® finish.
Hex washer head anchors have a large 5/8" washer dia.
UltraCon® and Stalgard® are registered trademarks of Acument Intellectual Properties, LLC.
Frequently Bought Together
Sleeve Type Stud Bolt Anchor Steel 3/8 x 6"
Couldn't load pickup availability
Sleeve Type Stud Bolt Anchor Steel 3/8 x 1-7/8"
Couldn't load pickup availability
Hex Cap Screw Property Class 8.8 M6-1 x 30mm
Couldn't load pickup availability
Hex Nut Grade 8 Steel M8-1.25
Couldn't load pickup availability
5/8x5 Mas-Tap Hd Anchor
Couldn't load pickup availability
Large Diameter Tapcon® Anchor 1/2 x 3"
Couldn't load pickup availability
Wheel Flare Molding Clip with Sealer Nylon
Couldn't load pickup availability
Autobahn Ergo Magna EZ Crimper Ratcheting Terminal Crimper
Couldn't load pickup availability
Sheet Metal Screw Slotted Truss Head #8 x 5/8"
Couldn't load pickup availability
Hex Cap Screw Property Class 8.8 Steel M10-1.5 x 20mm
Couldn't load pickup availability
Product Description
UltraCon+® Anchors and Drill Bits• Fast installation – drill hole, drive anchor
• Anchors available in three head styles: Slotted hex washer head for most applications; Phillips flat head provides flush seating for countersunk applications; 5/16" hex washer head has an oversized (0.540") washer face
• Replaces expansion anchors, plugs and screws
• Hi-Lo threads provide exceptional holding strength with no spalling
• Notched cutting edges for easy installation – cuts threads into poured concrete, brick or hollow block
• Gimlet point for self drilling into wood base material
• Reversible and removable
• Stalgard®-coated for superior corrosion resistance – withstands a minimum of 800 hours of neutral salt-spray testing without evidence of red rust on significant surfaces
• Carbide-Tipped UltraCon® Masonry Hammer Drill Bits are required – these bits are special size and tolerance products; use of any other bit will cause inconsistent performance of the anchor (sold separately)
5/16" dia. UltraCon® Anchors have a silver Stalgard® finish.
Hex washer head anchors have a large 5/8" washer dia.
UltraCon® and Stalgard® are registered trademarks of Acument Intellectual Properties, LLC.
Technical Specifications
| Item#: | 60755 |
|---|---|
| Diameter | 5/16 " |
| Length | 4 " |
| Type | Screw Anchor |
| Material | Carbon Steel |
| Finish | Stalgard-Coated |
| For Material Thickness | 2-1/2 - 3 " |
| Head Style | Hex |
| UNSPSC #: | 31162104 |
| TAA Compliant: | Yes |
| Weight: | 3.01 lb |
