Masonry Sleeve Anchor, Steel, Zinc Finish, 1/2 x 3"
(Pack of
10)
SKU:P34682 Item#: P34682
• Superior holding power in soft masonry applications such as cinder block, brick and sandstone
• High-strength alloy steel – resistant to shearing and elongation
• Full circumference gripping action for maximum strength – expansion shield flares out to produce a firm, stable anchor and full holding power even on abrasive or uneven surfaces
• Non-dishing flat washer provides full positive seating
• Drill and anchor diameter are the same size for easy installation
• Zinc-plated for corrosion resistance
• Anchors are pre-assembled and ready to use
• Effective on floors, walls and ceilings
NOTE: Holding power values are maximum. Always use a safety factor of at least 4:1.
Frequently Bought Together
Masonry Anchor Assortment 243Pcs
Couldn't load pickup availability
Masonry Anchor Assortment 243Pcs
Couldn't load pickup availability
Light-Medium Duty Anchor Assortment 555Pcs
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M6-1 x 20mm
Couldn't load pickup availability
Sheet Metal Screw Phillips Truss Head #14 x 3/4"
Couldn't load pickup availability
Blind Rivet Nut Insert Thin Wall M6-1
Couldn't load pickup availability
Woven Polyester Electrical Tape 19mm x 25m
Couldn't load pickup availability
Bumper Drive Rivet Plastic 10mm Hole
Couldn't load pickup availability
Front Bumper Specialty Nut Steel M4.2-1.41
Couldn't load pickup availability
Masonry Sleeve Anchor Steel 3/8 x 1-7/8"
Couldn't load pickup availability
Sleeve Type Stud Bolt Anchor Steel 1/4 x 2"
Couldn't load pickup availability
Sleeve Type Stud Bolt Anchor Steel 3/8 x 5"
Couldn't load pickup availability
Product Description
• Superior holding power in soft masonry applications such as cinder block, brick and sandstone• High-strength alloy steel – resistant to shearing and elongation
• Full circumference gripping action for maximum strength – expansion shield flares out to produce a firm, stable anchor and full holding power even on abrasive or uneven surfaces
• Non-dishing flat washer provides full positive seating
• Drill and anchor diameter are the same size for easy installation
• Zinc-plated for corrosion resistance
• Anchors are pre-assembled and ready to use
• Effective on floors, walls and ceilings
NOTE: Holding power values are maximum. Always use a safety factor of at least 4:1.
Technical Specifications
| Item#: | P34682 |
|---|---|
| Length | 3 " |
| Type | Sleeve-Type Stud Bolt Anchor |
| Material | Carbon Steel |
| Maximum Fastened Material Thickness | 1-1/2 " |
| Size | 1/2X3 " |
| Diameter | 1/2 " |
| Stud Size | 3/8 " |
| UNSPSC #: | 31162101 |
| TAA Compliant: | No |
| Weight: | 1.68 lb |
