Masonry Sleeve Anchor Steel 3/8 x 1-7/8"
(Pack of
25.0)
• Superior holding power in soft masonry applications such as cinder block, brick and sandstone
• High-strength alloy steel – resistant to shearing and elongation
• Full circumference gripping action for maximum strength – expansion shield flares out to produce a firm, stable anchor and full holding power even on abrasive or uneven surfaces
• Non-dishing flat washer provides full positive seating
• Drill and anchor diameter are the same size for easy installation
• Zinc-plated for corrosion resistance
• Anchors are pre-assembled and ready to use
• Effective on floors, walls and ceilings
NOTE: Holding power values are maximum. Always use a safety factor of at least 4:1.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
Sleeve Type Stud Bolt Anchor Steel 3/8 x 6"
Couldn't load pickup availability
Sleeve Type Stud Bolt Anchor Steel 3/8 x 1-7/8"
Couldn't load pickup availability
Diamond Grip II Threaded Insert Assortment
Couldn't load pickup availability
Hex Washer Head Self-Drilling Screw Assortment
Couldn't load pickup availability
Bumper Fascia Flares/Air Dam Push-Type Retainer
Couldn't load pickup availability
Wire Stripper-Cutter 6" Stainless Steel Jaws
Couldn't load pickup availability
Sleeve Type Stud Bolt Anchor Steel 5/16 x 2-1/2"
Couldn't load pickup availability
Sleeve Type Stud Bolt Anchor Steel 5/8 x 6"
Couldn't load pickup availability
Sleeve Type Stud Bolt Anchor Steel 1/4 x 2-1/4"
Couldn't load pickup availability
Product Description
• Superior holding power in soft masonry applications such as cinder block, brick and sandstone• High-strength alloy steel – resistant to shearing and elongation
• Full circumference gripping action for maximum strength – expansion shield flares out to produce a firm, stable anchor and full holding power even on abrasive or uneven surfaces
• Non-dishing flat washer provides full positive seating
• Drill and anchor diameter are the same size for easy installation
• Zinc-plated for corrosion resistance
• Anchors are pre-assembled and ready to use
• Effective on floors, walls and ceilings
NOTE: Holding power values are maximum. Always use a safety factor of at least 4:1.
Technical Specifications
| Item#: | P34666 |
|---|---|
| Length | 1-7/8 " |
| Type | Sleeve-Type Stud Bolt Anchor |
| Material | Carbon Steel |
| Maximum Fastened Material Thickness | 5/8 " |
| Size | 3/8X1-7/8 " |
| Diameter | 3/8 " |
| Stud Size | 5/16 " |
| UNSPSC #: | 31162101 |
| TAA Compliant: | No |
| Weight: | 1.87 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
