Mounted Flap Wheel 3"
(Pack of
6.0)
• Epoxy center construction holds stem and each flap securely in place
• 1/4" radius shank end design permits ease of installation into collet of tool
• Non-marring end cap prevents work surface from being damaged
• Use for final finish on metal surfaces, deburring and flash removal on machined parts, edge blending, blending and finishing of dies, molds, tools and tubing, smoothing metal, plastic and wood, and finishing prior to painting or plating
• Conforms to concave and convex surfaces
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
Silicon Carbide Grain Abrasive Wheel 8"
Couldn't load pickup availability
Abrasive Mounted Point Kit 1/4 to 1"
Couldn't load pickup availability
Silicon Carbide Grain Abrasive Wheel 6"
Couldn't load pickup availability
Universal External Thread Repair 11/16 to 1-1/2"
Couldn't load pickup availability
Universal Internal Thread Repair 11/16 to 13/16"
Couldn't load pickup availability
Universal External Thread Repair 5/32 to 11/16"
Couldn't load pickup availability
Flap Band 1-1/4"
Couldn't load pickup availability
Flap Band 1-1/4"
Couldn't load pickup availability
2" Dia. x 1" Wide Flap Wheel 120 Grit, 1/4" Shank Dia.
Couldn't load pickup availability
Air Inlet Grille/Bumper Fascia Push-Type Retainer
Couldn't load pickup availability
Wheel Flare Molding Clip with Sealer Nylon
Couldn't load pickup availability
Bumper Fascia Flares/Air Dam Push-Type Retainer
Couldn't load pickup availability
18V Right Angle Grinder with Zirconium Cut-Off Wheels
Couldn't load pickup availability
18V Rotary Hammer Drill Motor with SDS Drill Bits
Couldn't load pickup availability
18V Circular Saw Kit with Flood Light
Couldn't load pickup availability
Product Description
• Epoxy center construction holds stem and each flap securely in place• 1/4" radius shank end design permits ease of installation into collet of tool
• Non-marring end cap prevents work surface from being damaged
• Use for final finish on metal surfaces, deburring and flash removal on machined parts, edge blending, blending and finishing of dies, molds, tools and tubing, smoothing metal, plastic and wood, and finishing prior to painting or plating
• Conforms to concave and convex surfaces
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Technical Specifications
| Item#: | 92023M06 |
|---|---|
| Type | Flap Wheels |
| Diameter | 3 " |
| Width | 1 " |
| Arbor Size | 1/4 " |
| Grit | 120 |
| Maximum RPM | 20,000 RPM |
| Grain | Aluminum Oxide |
| Aluminum Approved | Yes |
| UNSPSC #: | 31191509 |
| TAA Compliant: | No |
| Weight: | 1.3007 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
