Steel Miniature End Brush, 3/4" Outer Diameter, 1/8" Shank Diameter, 7/8" Shank Length, 37000RPM Operating Speed
(Pack of
2)
SKU:89217 Item#: 89217
• Outlast standard brushes by at least 2-to-1
• High tensile, heat-treated wire for excellent fatigue resistance and fast cutting capabilities
• Provide continuous cutting action, uniform surface contaminant removal and a smooth finish
• Quality is continuously checked during the manufacturing process; brush samples must remain 100% intact when tested at 120% of their rated operating speed
• Unique manufacturing process neatly arranges wire so each tuft contains the same count
• Use bristle or nylon fill brushes for cleaning and polishing I.D. and O.D. surfaces, wet scrubbing, cleaning and fine abrasive finishing
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Frequently Bought Together
Medium Face Crimped Wire Wheel 8"
Couldn't load pickup availability
Narrow Face Crimped Wire Wheel 6"
Couldn't load pickup availability
Tube Brush Holder 1/8"
Couldn't load pickup availability
Stemmed Knot-Type Wire Wheel 3"
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 5/32"
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 2-1/4" (M6)
Couldn't load pickup availability
Steel Crimped End Brush 1"
Couldn't load pickup availability
Front Bumper and Radiator Support Drive Rivet
Couldn't load pickup availability
Front Bumper Drive Rivet Plastic 10mm Hole
Couldn't load pickup availability
Metric Indented Hex Head Bolt with 17mm Washer
Couldn't load pickup availability
Spinning Handmaster Driver Set 5Pc Set
Couldn't load pickup availability
Nutsetter & Bit Set, Magnetic, 22pc
Couldn't load pickup availability
Universal Socket Set, SAE, 1/2" Drive, 6pc
Couldn't load pickup availability
Product Description
• Outlast standard brushes by at least 2-to-1• High tensile, heat-treated wire for excellent fatigue resistance and fast cutting capabilities
• Provide continuous cutting action, uniform surface contaminant removal and a smooth finish
• Quality is continuously checked during the manufacturing process; brush samples must remain 100% intact when tested at 120% of their rated operating speed
• Unique manufacturing process neatly arranges wire so each tuft contains the same count
• Use bristle or nylon fill brushes for cleaning and polishing I.D. and O.D. surfaces, wet scrubbing, cleaning and fine abrasive finishing
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Technical Specifications
| Item#: | 89217 |
|---|---|
| Type | Miniature |
| Material | Nylon |
| O.D. | 3/4 " |
| Maximum RPM | 37,000 |
| Shank Size | 1/8 " |
| Shank Length | 7/8 " |
| UNSPSC #: | 27111907 |
| TAA Compliant: | Yes |
| Weight: | 0.04 lb |
