Quick Seal 2000 Sprayable Seam Sealer Black
(Pack of
1)
Quick Seal 2000 is a one-part, sprayable, modified urethane seam sealer that matches OEM sprayable sealers and can be painted and baked immediately after application. Applied with an air applicator gun, a variety of textures can be achieved using tooling and air flow pressure. Adheres to primed or painted plastic body panels or bare metal surfaces. Extremely flexible, it can be used on vertical and horizontal surfaces. Sprays on easily and evenly to form a tough, water-resistant seal. Use on floor and trunk seams, to deaden sound, or to protect against stone chips and corrosion.
Non-sag formula
Non-isocyanate formula
Excellent adhesion flexibility and durability
Use on primed or painted plastic or bare metal surfaces
Paintable and bakeable immediately best to paint within 72 hours
Can be brushed on if needed
Excellent adhesion to many surfaces including bare metal*
Matte/satin finish
Item No. KT12592: OEM Recommended GM 17107; Honda Approval No. 18-134; Acura Approval No. 18-070
*For best results always follow OEM recommendations for priming procedure
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
This item cannot ship via any air services. Please reference the SDS for hazardous information specific to this item. Additional shipping charges may apply.
Catalog page#: 1-9
Frequently Bought Together

Spray Leak Chek™ Extension Tube 12"
Couldn't load pickup availability

Panel Adhesive S.I.R. with 2 Turbo Mixers
Couldn't load pickup availability

Channel Grip Glass Installation Adhesive 1.7fl.oz
Couldn't load pickup availability

Tire and Wheel Cleaner - Non-Acid
Couldn't load pickup availability

Ultra-Stick No Drip Contact Wet/Dry Adhesive Clear
Couldn't load pickup availability

Job Size Dual Cartridge Gun
Couldn't load pickup availability

Speedy 500 Adhesive Remover 15oz
Couldn't load pickup availability

Jackpot Hand Cleaner With Pumice
Couldn't load pickup availability

Premium Wash and Wax (Not BSS)
Couldn't load pickup availability

Aluminum Application Flap Disc 4-1/2"
Couldn't load pickup availability

Aluminum Application Flap Disc 4-1/2"
Couldn't load pickup availability

Flap Disc 4-1/2"
Couldn't load pickup availability

Anti-Rattle/Squeak BRS Tape 8 x 10"
Couldn't load pickup availability

21 Compartment Small Drawer
Couldn't load pickup availability

Adhesive-Back Shim Stock 7/16 x 3/4" x 30'
Couldn't load pickup availability

Adhesive-Back Shim Stock 9/16 x 1" x 30'
Couldn't load pickup availability

Sound Deadener Black 10fl.oz
Couldn't load pickup availability

Quick Seal 2000 Sprayable Seam Sealer Beige
Couldn't load pickup availability

Acoustical Starter Assortment
Couldn't load pickup availability

Seal-N-Calk Caulking Strip Gray 1/4" x 72'
Couldn't load pickup availability

Quick Seal Manual Sausage Pack Applicator
Couldn't load pickup availability

Nylon Cable Tie 11-3/4" Black
Couldn't load pickup availability

Front Fender Push-Type Retainer Nylon 18mm
Couldn't load pickup availability

Spot Weld Remover Drill Bit HSS 2-13/16(M8)
Couldn't load pickup availability
Product Description
Quick Seal 2000 is a one-part, sprayable, modified urethane seam sealer that matches OEM sprayable sealers and can be painted and baked immediately after application. Applied with an air applicator gun, a variety of textures can be achieved using tooling and air flow pressure. Adheres to primed or painted plastic body panels or bare metal surfaces. Extremely flexible, it can be used on vertical and horizontal surfaces. Sprays on easily and evenly to form a tough, water-resistant seal. Use on floor and trunk seams, to deaden sound, or to protect against stone chips and corrosion. Non-sag formula
Non-isocyanate formula
Excellent adhesion flexibility and durability
Use on primed or painted plastic or bare metal surfaces
Paintable and bakeable immediately best to paint within 72 hours
Can be brushed on if needed
Excellent adhesion to many surfaces including bare metal*
Matte/satin finish
Item No. KT12592: OEM Recommended GM 17107; Honda Approval No. 18-134; Acura Approval No. 18-070
*For best results always follow OEM recommendations for priming procedure
Technical Specifications
Item#: | KT12592 |
---|---|
Type | Urethane seam seal |
Container Type | Cartridge |
Size | 9.8 Fl. Oz. (US) |
Color | Black |
Work Time | 5 min |
Cure Time | <16 h |
Physical Form | Liquid Paste |
Description | Quick Seal 2000 |
UNSPSC #: | 31201600 |
TAA Compliant: | Yes |
Weight: | 1.22 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
This item cannot ship via any air services. Please reference the SDS for hazardous information specific to this item. Additional shipping charges may apply.
