SAE J995C Locknut with Nylon Insert, Grade A, Steel, Zinc Finish, Coarse Thread, 0.999" Thickness, 1-5/16" Across Flats, 7/8-9
(Pack of
25)
• Nylon insert has low coefficient of friction (will not damage bolt threads), high resilience, low chemical activity and relatively great hardness
• Locks uniformly over entire range of bolt thread tolerances and has low, even torque scatter, permitting repeated predictable tightening torques
• Manufactured to IFI standards
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog page#: 11-28
Frequently Bought Together
Hex Flange Bolt Grade 10.9 M10-1.25 x 30mm
Couldn't load pickup availability
DIN 125A Flat Washer Grade 140 HV M10
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M8-1.25 x 25mm
Couldn't load pickup availability
DIN 982 High Locknut with Nylon Insert M8-1.25
Couldn't load pickup availability
Locknut with Nylon Insert Grade 10 M12-1.75
Couldn't load pickup availability
Locknut with Nylon Insert Grade A 5/16-18
Couldn't load pickup availability
SAE J995C Locknut with Nylon Insert Grade 8 3/8-16
Couldn't load pickup availability
Hex Nut Grade 8 Steel M6-1
Couldn't load pickup availability
Serrated Hex Flange Nut Alloy Steel M8-1.25
Couldn't load pickup availability
Woven Polyester Electrical Tape 19mm x 25m
Couldn't load pickup availability
Inner Fender Shield Attaching Clip Nylon Black
Couldn't load pickup availability
Cowl Bumper Fender Liner/Engine Under Cover Rivet
Couldn't load pickup availability
Product Description
• Nylon insert has low coefficient of friction (will not damage bolt threads), high resilience, low chemical activity and relatively great hardness• Locks uniformly over entire range of bolt thread tolerances and has low, even torque scatter, permitting repeated predictable tightening torques
• Manufactured to IFI standards
Technical Specifications
| Item#: | 308 |
|---|---|
| Diameter | 7/8 " |
| Thread Pitch | 9 |
| Grade | A |
| Finish | Bright Zinc |
| Type | Nylon Insert Lock Nut |
| Material | Carbon Steel |
| Thickness | 0.999 " |
| Across Flats | 1-5/16 " |
| Thread | Coarse |
| Size | 7/8-9 |
| Specifications | SAE J995C |
| Maximum Temperature | 350º F |
| Proof | 90,000 PSI |
| UNSPSC #: | 31161716 |
| TAA Compliant: | No |
| Weight: | 4.73 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
