Setting Tool for Drop-In Anchor, 3/8"
(Pack of
1)
SKU:96956 Item#: 96956
1. Drill hole 1/8" deeper than anchor length for flush mounting. Where surface deterioration is present, drill hole slightly deeper to permit anchor to be recessed.2. Drop anchor into hole. If hole is slightly undersized, tap anchor with hammer until it bottoms in hole.3. To set expander plug, installation tool can be struck a few sharp blows with a hammer, or an automatic air tool or electric tool can be used.4. Place fixture in position, insert bolt and tighten.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
Frequently Bought Together
Threaded Rod Anchor Hex Drive Socket 1/2"
$0.00
Couldn't load pickup availability
5/16" Drive Socket for 1/4" UltraCon Anchors
$0.00
Couldn't load pickup availability
5/8 Drop In Anchor Set Tool
$0.00
Couldn't load pickup availability
Conical Screw Anchor Kit Plastic 201Pcs
$0.00
Couldn't load pickup availability
Drill 'N Drive Masonry Anchor Kit 102Pcs
$0.00
Couldn't load pickup availability
Self-Drilling Wallboard Mini Anchor Kit 51Pcs
$0.00
Couldn't load pickup availability
Open End Rivet Dome Head Aluminum 5/32"
$0.00
Couldn't load pickup availability
Serrated Hex Flange Nut Alloy Steel M10-1.25
$0.00
Couldn't load pickup availability
Hex Nut Grade 8 Steel M10-1.5
$0.00
Couldn't load pickup availability
Bumper Cover Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Shield Push-Type Retainer with Metal Insert
$0.00
Couldn't load pickup availability
Rocker Panel Molding Clip Nylon White 12 x 20mm
$0.00
Couldn't load pickup availability
Product Description
1. Drill hole 1/8" deeper than anchor length for flush mounting. Where surface deterioration is present, drill hole slightly deeper to permit anchor to be recessed.2. Drop anchor into hole. If hole is slightly undersized, tap anchor with hammer until it bottoms in hole.3. To set expander plug, installation tool can be struck a few sharp blows with a hammer, or an automatic air tool or electric tool can be used.4. Place fixture in position, insert bolt and tighten.Technical Specifications
| Item#: | 96956 |
|---|---|
| Type | Drop-In Anchor Setting Tool |
| Size | 3/8 " |
| Tool Size | 3/8 " |
| UNSPSC #: | 31162100 |
| TAA Compliant: | No |
| Weight: | 0.3 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
