Sheet Metal Drill Bit, Double Ended, Alloy Steel, 1/8 x 1-7/8"
(Pack of 6)

Supertanium®

Take on demanding jobs with the Sheet Metal Drill Bit made from premium Supertanium® alloy steel. Designed to resist wear, bending, and breaking, this bit stays sharp longer, ensuring precision and reliability for every project. Its self-starting point eliminates the need for center punching, while the short shank and flute minimize breakage when navigating inner panels. With points on both ends and a perfect fit in chuck jaws, it delivers unmatched durability and performance for sheet metal fabricators and auto body technicians alike.
• Special alloy steel resists wear, bending and breaking
• Self-starting point eliminates center punching
• Short shank and flute reduce breakage caused by hitting inner panels
• Specially designed with a point on both ends
• Supertanium® alloy steel stays sharp longer – does not burn out
• Fits perfectly into chuck jaws without damage
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Read More

California Proposition 65: Not Applicable
www.P65Warnings.ca.gov

Frequently Bought Together

DV_ZoomOriginal_I_56539.jpg

Scotch-Brite Roloc Bristle Disc 2"

Item#: 56539
DV_ZoomOriginal_I_P35374.jpg

Aluminum Oxide Grain Locking Grinding Disc 2"

Item#: P35374
DV_ZoomOriginal_P_1072.jpg

Reinforced Mini Cut-Off Wheel 3"

Item#: 93483M12
DV_ZoomOriginal_P_CTPMP1151.jpg

Cryobit #20 Dia. Twin Bit, 135o Split Pont

Item#: DY80160020
DV_ZoomOriginal_P_32049.jpg

Double End Drill Bit 7/32"

Item#: 81202
DV_ZoomOriginal_P_CTPMP1151.jpg

Cryobit 5/32" Dia. Twin Bit, 135o Split Pont

Item#: DY80161064
DV_ZoomOriginal_I_KT14707.jpg

Spot Weld Remover Drill Bit 5/16" (M8)

Item#: KT14707
DV_ZoomOriginal_P_20539.jpg

Spot Weld Remover Drill Bit Kit 11Pcs

Item#: P7974
No product placeholder

Jobber Length Drill Bit HSS 6.5mm

Item#: 98967
DV_ZoomOriginal_P_37827.jpg

Trash Can Liner Low Density 24 x 32"

Item#: 10128
DV_ZoomOriginal_P_37827.jpg

Trash Can Liner Low Density 43 x 47"

Item#: 10133
DV_ZoomOriginal_P_37828.jpg

Trash Can Liner High Density 43 x 48"

Item#: 10127
DV_ZoomOriginal_P_FP5036.jpg

Standard Industrial Safety Push-Button Safety Coupler 1/4" Body x 1/4" MNPT

Item#: 1489995
DV_ZoomOriginal_P_FP5034.jpg

Tru-Flate Safety Push-Button Safety Coupler 1/4" Body x 1/4" MNPT

Item#: 1490005
DV_ZoomOriginal_P_FP5036.jpg

Standard Industrial Safety Push-Button Safety Coupler 3/8" Body x 3/8" MNPT

Item#: 1489999
DV_ZoomOriginal_P_1391680217067.jpg

Prem Black Nitrile Glvs, Lrg

Item#: 1418044
DV_ZoomOriginal_I_1635540.jpg

Glossy Back Paper Floor Mat, 17" x 22"

Item#: 1635540
DV_ZoomOriginal_I_1558889.jpg

Marker Pen Yellow

Item#: 1558889
DV_ZoomOriginal_I_P86111.jpg

Cowl Bumper Fender Liner/Engine Under Cover Rivet

Item#: P86111
DV_ZoomOriginal_I_KT13527.jpg

Front Bumper Trim Panel/Running Board Split Rivet

Item#: KT13527
DV_ZoomOriginal_I_P24252.jpg

Front Fender Liner Push-Type Retainer Nylon 20mm

Item#: P24252
DV_ZoomOriginal_I_P60477.jpg

Nylon Cable Tie 15-1/4" Black

Item#: P60477
DV_ZoomOriginal_I_KT13409.jpg

Nylon Cable Tie 11-3/4" Black

Item#: KT13409
DV_ZoomOriginal_I_P60451.jpg

Nylon Cable Tie 7-1/2" Black

Item#: P60451
DV_ZoomOriginal_I_KT13763.jpg

Specialty Rivet with Plastic Cap Aluminum 3.2mm

Item#: KT13763
DV_ZoomOriginal_I_KT11528.jpg

Inner Fender Shield Attaching Clip Nylon Black

Item#: P27685
DV_ZoomOriginal_I_P85262.jpg

Bumper Radiator and Grille Drive Rivet 7mm Hole

Item#: P85262
DV_ZoomOriginal_I_DY89310520.jpg

Interchangeable Hex Bit Set 24Pc SAE

Item#: DY89310520
DV_ZoomOriginal_I_P68267.jpg

Twist-On Abrasive Disc 2"

Item#: P68267
DV_ZoomOriginal_I_DY81100900.jpg

Master Security Bit Set 203Pc

Item#: DY81100900

Product Description

Take on demanding jobs with the Sheet Metal Drill Bit made from premium Supertanium® alloy steel. Designed to resist wear, bending, and breaking, this bit stays sharp longer, ensuring precision and reliability for every project. Its self-starting point eliminates the need for center punching, while the short shank and flute minimize breakage when navigating inner panels. With points on both ends and a perfect fit in chuck jaws, it delivers unmatched durability and performance for sheet metal fabricators and auto body technicians alike.
• Special alloy steel resists wear, bending and breaking
• Self-starting point eliminates center punching
• Short shank and flute reduce breakage caused by hitting inner panels
• Specially designed with a point on both ends
• Supertanium® alloy steel stays sharp longer – does not burn out
• Fits perfectly into chuck jaws without damage
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Technical Specifications

Item#: P67286
Type Sheet Metal Drill Bit
Material High Speed Steel
Diameter 1/8 "
Decimal Equivalent 0.1250 "
Overall Length 1-7/8 "
Flats None
Flute Type Spiral
Shank Straight
Finish Silver & Black
UNSPSC #: 23241600
TAA Compliant: Yes
Weight: 0.09 lb

Product Restrictions

California Proposition 65: Not Applicable
www.P65Warnings.ca.gov

Your Recently Viewed Items