Silicone Heater and Radiator Hose 3-7/16" OD
(Pack of
3.0)
• Use where space requirements dictate sharp bends
• Polyester and steel helix reinforcement
• Will not kink
• Low pressure service
• Lasts up to ten years
• Temperature range: –65° to +350°F (–54°C to +177°C)
• Use Silicone Heater and Hose Clamps, Item Nos. 90781, 90782, 88718 – 88727
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog page#: 7-10
Frequently Bought Together
Windshield Wiper and Vacuum Tubing 7/64" ID x 50'
Couldn't load pickup availability
Silicone Heater and Radiator Hose 1-7/16" OD
Couldn't load pickup availability
Silicone Heater and Radiator Hose 1-1/16" OD
Couldn't load pickup availability
Parker DOT Compression - Nylon Male Branch Tee 3/8x1/4x1/4
Couldn't load pickup availability
DOT Transmission Connector Male Brass 1/16 x 5/32"
Couldn't load pickup availability
DOT Transmission Connector Male Brass 1/16 x 1/8"
Couldn't load pickup availability
Super 77 Hose Clamp SS 3-1/2 to 4-3/8"
Couldn't load pickup availability
Silicone Heater/Coolant Hose Clamp 3-9/16 - 4-1/2"
Couldn't load pickup availability
H213 Truck Hose 31/64" OD x 50'
Couldn't load pickup availability
Ergonomic Blow Gun Rubber Tip
Couldn't load pickup availability
Push-Button Air Coupler Steel 1/4" x 1/4-18
Couldn't load pickup availability
4T Series Crimp-On Hose End 1/4" x 1/4-18
Couldn't load pickup availability
Wheel Flare Molding Clip with Sealer Nylon
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 1/8"
Couldn't load pickup availability
Miniature Incandescent Bulb 12V 2CP
Couldn't load pickup availability
Product Description
• Use where space requirements dictate sharp bends• Polyester and steel helix reinforcement
• Will not kink
• Low pressure service
• Lasts up to ten years
• Temperature range: –65° to +350°F (–54°C to +177°C)
• Use Silicone Heater and Hose Clamps, Item Nos. 90781, 90782, 88718 – 88727
Technical Specifications
| Item#: | 88711 |
|---|---|
| Type | Silicone Heater and Radiator Hose |
| I.D. | 3 " |
| Bend Radius | 6 " |
| Burst Pressure | 105 PSI |
| Hose Cover Material | Silicone |
| Hose Reinforcement | Polyester with Steel Helix |
| Temperature | -65 to +350 F |
| Category/Performance | Better Quality - 2 Ply Large Diameter - Steel Reinforced |
| UNSPSC #: | 25170000 |
| TAA Compliant: | Yes |
| Weight: | 3.0 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
