SNAPTOGGLE® Toggle Bolt Anchor 3/8-16
(Pack of
10)
Three times faster than conventional toggle bolts
Requires a smaller pilot hole and uses a shorter bolt
Stays in place with or without a bolt
Heads won’t fall behind wall
Wall or ceiling thickness range: 3/8" 2-1/2"
Minimum bolt length: Fixture thickness + wall or ceiling thickness + 1/2"
Minimum clearance behind wall: 1-7/8"
Tests are ultimate load. However, industry safety standards recommend 1/4 of the value for actual application. Age and condition of the material and the screw size will cause tensile strength to vary.Toggler® is a registered trademark of Mechanical Plastics Corp.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together

Double Expansion Shield Anchor Alloy Steel 5/16"
Couldn't load pickup availability

Sleeve Type Stud Bolt Anchor Steel 5/8 x 4-1/4"
Couldn't load pickup availability

Sleeve Type Stud Bolt Anchor Steel 3/8 x 6"
Couldn't load pickup availability

Hex Nut Grade 8 Steel M6-1
Couldn't load pickup availability

Hex Nut Grade 8 Steel M12-1.75
Couldn't load pickup availability

Hammerlock Cotter Pin 1/8 x 2-1/2"
Couldn't load pickup availability

Bumper Drive Rivet Plastic 10mm Hole
Couldn't load pickup availability

Wheel Flare Molding Clip with Sealer Nylon
Couldn't load pickup availability

Push-Type Retainer Nylon 20mm
Couldn't load pickup availability

Wing Type Toggle Bolt Round Head 1/4-20 x 6"
Couldn't load pickup availability

Pin Drive Anchor Mushroom Head Nylon 1/4 x 1/2"
Couldn't load pickup availability

Wing Type Toggle Bolt Round Head #10-24 x 6"
Couldn't load pickup availability
Product Description
Three times faster than conventional toggle bolts Requires a smaller pilot hole and uses a shorter bolt
Stays in place with or without a bolt
Heads won’t fall behind wall
Wall or ceiling thickness range: 3/8" 2-1/2"
Minimum bolt length: Fixture thickness + wall or ceiling thickness + 1/2"
Minimum clearance behind wall: 1-7/8"
Tests are ultimate load. However, industry safety standards recommend 1/4 of the value for actual application. Age and condition of the material and the screw size will cause tensile strength to vary.Toggler® is a registered trademark of Mechanical Plastics Corp.
Technical Specifications
Item#: | 90919 |
---|---|
Type | Toggle Bolt Anchor |
Size | 3/8-16 " |
Diameter | 3/8 " |
Thread | Coarse |
Thread Pitch | 16 tpi |
Drill Size | 3/4 " |
Tensile Proof Test Load In Concrete | 1,167 lb |
Shear Proof Test Load | 2,044 lb |
Tensile Proof Test Load | 1120 lb |
Bolt Size | 3/8-16 " |
UNSPSC #: | 31162103 |
TAA Compliant: | Yes |
Weight: | 0.68 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
