Home Tools Cutting Tools Drill Bits Carbide Drills Solid Die Drill Bit Carbide 1/8"
Carbide Drills
DV_ZoomOriginal_P_1011.jpg
DV_ZoomOriginal_P_1011_AP1.jpg
DV_ZoomOriginal_P_1011_AP2.jpg
DV_ZoomOriginal_P_1011_TP1.jpg
DV_ZoomOriginal_P_1011.jpg
DV_ZoomOriginal_P_1011_AP1.jpg
DV_ZoomOriginal_P_1011_AP2.jpg
DV_ZoomOriginal_P_1011_TP1.jpg

Solid Die Drill Bit, Carbide, 5/8" Flute Length, 1/8 x 1-1/2"
(Pack of 1)

Item#: 56262

Kent Automotive

• Produces chips without generating excessive heat
• Accurately sized holes are produced without annealing or softening the workpiece
• Reamer-type finishes are easily produced
• Two straight flutes
• Made in USA
• Designed to drill hardened steel in the Rc 50 – 65 range
• Both a production drill and a salvage or reclaim tool
• Drill through glass, all series of stainless steel, nickel alloys, ceramics or weldments
• Drill out broken drills and taps
• Can be used in a drill press or portable power drill
NOTE: The drill is intended to be run at 60 – 100 SFM. Carbide drills are normally run at double the speed recommended for high-speed steel drills with a slightly lower feed rate. Proper drilling speed and the appropriate feed rate must be calculated for the material being drilled.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Read More
Check Availability

California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov

Frequently Bought Together

DV_ZoomOriginal_P_CTPMP1110.jpg

Cryo Armor Cut 16.0MM Dia. Metric Drill Bit, Carbide 118o Point

Item#: DY80237160
DV_ZoomOriginal_P_CTPMP1191.jpg

Cryo Armor Cut 15/32" Dia. Drill Bit, Carbide 118o Point

Item#: DY80233064
DV_ZoomOriginal_P_RC800.jpg

Drill Bit Carbide 9mm

Item#: 1195316
DV_ZoomOriginal_I_KT12707.jpg

Abrasive Bristle Wire Belt Steel 23mm

Item#: KT12707
DV_ZoomOriginal_P_CTPMP1140.jpg

Cryoslash 3-5/8" x 1/2" x 0.025" Air Saw Blade 24 TPI

Item#: DY80324224
DV_ZoomOriginal_I_KT12712.jpg

Polymer Wheel Rubber Eraser 30mm

Item#: KT12712
DV_ZoomOriginal_I_1447372.jpg

Spot Weld Remover Drill Bit Cobalt 1/4" (M6.5)

Item#: 1447372
DV_ZoomOriginal_I_KT13517.jpg

Spot Weld Remover Drill Bit Cobalt 5/16" (M8)

Item#: KT13517
DV_ZoomOriginal_P_32049.jpg

Double End Drill Bit 1/8"

Item#: P51392
DV_ZoomOriginal_I_KT14285.jpg

Front Bumper Drive Rivet Plastic 10mm Hole

Item#: KT14285
DV_ZoomOriginal_I_P85438.jpg

Front Bumper Drive Rivet Plastic 7mm Hole

Item#: P85438
DV_ZoomOriginal_I_P24082.jpg

Front Fender Push-Type Retainer Nylon 20mm

Item#: P24082
DV_ZoomOriginal_I_DY89310041.jpg

Universal Socket Set, 3/8" Drive, 20pc

Item#: DY89310041
DV_ZoomOriginal_P_HT5437.jpg

8Pc Metric Mini Double Head Wrench Set

Item#: DY89250450
DV_ZoomOriginal_P_547.jpg

Jobber Length Drill Bit HSS 6.5mm

Item#: 98967

Product Description

• Produces chips without generating excessive heat
• Accurately sized holes are produced without annealing or softening the workpiece
• Reamer-type finishes are easily produced
• Two straight flutes
• Made in USA
• Designed to drill hardened steel in the Rc 50 – 65 range
• Both a production drill and a salvage or reclaim tool
• Drill through glass, all series of stainless steel, nickel alloys, ceramics or weldments
• Drill out broken drills and taps
• Can be used in a drill press or portable power drill
NOTE: The drill is intended to be run at 60 – 100 SFM. Carbide drills are normally run at double the speed recommended for high-speed steel drills with a slightly lower feed rate. Proper drilling speed and the appropriate feed rate must be calculated for the material being drilled.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.

Technical Specifications

Item#: 56262
Drill Type Fractional
Type Drill Bit
Material Carbide
Finish Bright
Diameter 1/8 "
Decimal Equivalent 0.1250 "
Flutes 2
Flute Length 5/8 "
Shank Straight
Material Thickness 9/16 "
Overall Length 1-1/2 "
SAE Code TD7DSX 0.1250 S1Z33 / 00.63 - 01.50
UNSPSC #: 23241605
TAA Compliant: Yes
Weight: 0.01 lb

Product Restrictions

California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov

Suggested Products

DV_ZoomOriginal_P_11045.jpg

Solid Drill Bit Carbide 5/16"

Item#: P58047
DV_ZoomOriginal_P_11045.jpg

Solid Drill Bit Carbide 1/8"

Item#: P58026
DV_ZoomOriginal_P_RC600.jpg

Drill Bit Carbide 13/64"

Item#: 1195334
DV_ZoomOriginal_P_RC800.jpg

Drill Bit Carbide 1/8"

Item#: 1195166
DV_ZoomOriginal_P_CTPMP1191.jpg

Cryo Armor Cut 1/8" Dia. Drill Bit, Carbide 118o Point

Item#: DY80230864
DV_ZoomOriginal_P_CTPMP1191.jpg

Cryo Armor Cut 25/64" Dia. Drill Bit, Carbide 118o Point

Item#: DY80232564
DV_ZoomOriginal_P_CTPMP1191.jpg

Cryo Armor Cut 11/16" Dia. Drill Bit, Carbide 118o Point

Item#: DY80234464
DV_ZoomOriginal_P_CTPMP1191.jpg

Cryo Armor Cut 7/32" Dia. Drill Bit, Carbide 118o Point

Item#: DY80231464
DV_ZoomOriginal_P_CTPMP1191.jpg

Cryo Armor Cut 27/64" Dia. Drill Bit, Carbide 118o Point

Item#: DY80232764
DV_ZoomOriginal_P_CTPMP1191.jpg

Cryo Armor Cut 15/16" Dia. Drill Bit, Carbide 118o Point

Item#: DY80236064
DV_ZoomOriginal_P_CTPMP1191.jpg

Cryo Armor Cut 5/8" Dia. Drill Bit, Carbide 118o Point

Item#: DY80234064
DV_ZoomOriginal_P_CTPMP1191.jpg

Cryo Armor Cut 1" Dia. Drill Bit, Carbide 118o Point

Item#: DY80236464

Your Recently Viewed Items