Standard Twist Steel Knot-Type Wire Wheel, 0.023" Wire, 5/8" Arbor, 8" Outer Diameter, 6000RPM Operating Speed
(Pack of
1)
• Outlast standard brushes by at least 2-to-1
• High tensile, heat-treated wire for excellent fatigue resistance and fast cutting capabilities
• Provide continuous cutting action, uniform surface contaminant removal and a smooth finish
• Quality is continuously checked during the manufacturing process; brush samples must remain 100% intact when tested at 120% of their rated operating speed
• Unique manufacturing process neatly arranges wire so each tuft contains the same count
• Retaining plate design of knot-type brush provides greater brush efficiency and safety – no sharp corners to damage wire filaments – wire loss is minimal – each round hole secures only one tuft
• Use for removal of rust, scale, weld spatter and oxidation, heavy-duty cleaning operations, heavy burr removal, roughening surfaces, weld cleaning, and surface conditioning
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Catalog page#: 10-64
Frequently Bought Together
Encapsulated Crimped Wire Wheel 3"
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 2-13/16(M8)
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 1/8"
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 1/4" (M6)
Couldn't load pickup availability
Rear Bumper Cover Retainer Plastic 18mm
Couldn't load pickup availability
Bumper and Wheel Well Liner Push-Type Retainer
Couldn't load pickup availability
Engine Under Cover Drive Rivet Plastic 7mm Hole
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 2-13/16(M8)
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 1/8"
Couldn't load pickup availability
Cross-Over Socket Extension Set, 3/8" Drive, 3 Piece
Couldn't load pickup availability
Stemmed Knot-Type Wire Wheel 3"
Couldn't load pickup availability
Twist Knot Wire Wheel 3" Dia., .014" Wire Dia., 1/4" Shank
Couldn't load pickup availability
Stemmed Crimped Wire Wheel 2"
Couldn't load pickup availability
Product Description
• Outlast standard brushes by at least 2-to-1• High tensile, heat-treated wire for excellent fatigue resistance and fast cutting capabilities
• Provide continuous cutting action, uniform surface contaminant removal and a smooth finish
• Quality is continuously checked during the manufacturing process; brush samples must remain 100% intact when tested at 120% of their rated operating speed
• Unique manufacturing process neatly arranges wire so each tuft contains the same count
• Retaining plate design of knot-type brush provides greater brush efficiency and safety – no sharp corners to damage wire filaments – wire loss is minimal – each round hole secures only one tuft
• Use for removal of rust, scale, weld spatter and oxidation, heavy-duty cleaning operations, heavy burr removal, roughening surfaces, weld cleaning, and surface conditioning
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Technical Specifications
| Item#: | 89194 |
|---|---|
| Type | Knot-Type |
| Style | Standard Twist |
| Material | Steel |
| O.D. | 8 " |
| Arbor Size | 5/8 " |
| Wire Gauge | 0.023 " |
| Maximum RPM | 6,000 |
| Face Width | 5/8 " |
| UNSPSC #: | 27111907 |
| TAA Compliant: | Yes |
| Weight: | 2.36 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
