Steel Expansion Plug, Concave Style, Zinc Plated, Clean Hole with Tuff-Grit™ Screen Mesh, 1-1/16"
(Pack of 25)

SKU:3054 Item#: 3054

Kent Automotive

• Stamped with fractional and decimal size
1. Clean hole with Tuff-Grit™ Screen Mesh (see Abrasives section).
2. Apply Loctite® 609™ Retaining Compound, Item No. 1143653 (Canada Item No. 1166418 ), around outside of plug.
3. Spread retaining compound around inside hole.
4. Install plugs with proper tooling.

Check Availability

Usually Ships: Today

While Supplies Last

Quantity

Catalog page#: 7-20

Frequently Bought Together

Fender and Bumper Push-Type Retainer Nylon 18mm

Hex Head Sheet Metal Screw with 16mm Washer Steel

Air Distributor Defroster Push-Type Retainer

Rubber Expansion Plug 1-3/8"

Steel Expansion Plug Concave 1-1/8"

Steel Expansion Plug Concave 1-3/16"

Fender and Bumper Push-Type Retainer Nylon 18mm

Hex Head Sheet Metal Screw with 16mm Washer Steel

Air Distributor Defroster Push-Type Retainer

Metric Drain Plug Gasket M12 x 1.25mm

Item#: P66777M01

Aluminum Washers - 14x20

Drain Plug with Gasket 1/2-20 Oversized

Item#: P3092M01

Fender and Bumper Push-Type Retainer Nylon 18mm

Hex Head Sheet Metal Screw with 16mm Washer Steel

Air Distributor Defroster Push-Type Retainer

Reciprocating Saw Blade 12" 10TPI

3" Partsmaster Type R Surface Conditioning Disk-Coarse

Item#: PM08160301

Twist Knot Wire Wheel 3" Dia., .014" SS Wire Dia., 1/4" Shank

Item#: PM08154305

Reciprocating Saw Blade 12" 10TPI

3" Partsmaster Type R Surface Conditioning Disk-Coarse

Item#: PM08160301

Twist Knot Wire Wheel 3" Dia., .014" SS Wire Dia., 1/4" Shank

Item#: PM08154305

Product Description

• Stamped with fractional and decimal size
1. Clean hole with Tuff-Grit™ Screen Mesh (see Abrasives section).
2. Apply Loctite® 609™ Retaining Compound, Item No. 1143653 (Canada Item No. 1166418 ), around outside of plug.
3. Spread retaining compound around inside hole.
4. Install plugs with proper tooling.

Technical Specifications

Item#:	3054
Style	Concave
Size	1-1/16 "
Material	Steel
Plating	Zinc
UNSPSC #:	25174000
TAA Compliant:	Yes
Weight:	0.55 lb

Suggested Products

Rear Bumper Cover Retainer Plastic 18mm

Bumper and Wheel Well Liner Push-Type Retainer

Fender Apron Drive Rivet 8mm Hole

Engine Under Cover Drive Rivet Plastic 7mm Hole

Cowl Bumper Fender Liner/Engine Under Cover Rivet

Front Fender Push-Type Retainer Nylon 20mm

Drive Rivet Nylon M8

Bumper Push-Type Retainer Nylon 18mm

Bumper Radiator and Grille Drive Rivet 7mm Hole

Push-Type Retainer Nylon 16 x 19mm

Bumper Fascia General Purpose Split Rivet 3/16"

Fender Splash Shield Push Rivet Nylon 7mm Hole

Your Recently Viewed Items