Steel Expansion Plug, Concave Style, Zinc Plated, Clean Hole with Tuff-Grit™ Screen Mesh, 1-1/8"
(Pack of 25)

SKU:3055 Item#: 3055

Kent Automotive

• Stamped with fractional and decimal size
1. Clean hole with Tuff-Grit™ Screen Mesh (see Abrasives section).
2. Apply Loctite® 609™ Retaining Compound, Item No. 1143653 (Canada Item No. 1166418 ), around outside of plug.
3. Spread retaining compound around inside hole.
4. Install plugs with proper tooling.

Check Availability

Usually Ships: Today

While Supplies Last

Quantity

Catalog page#: 7-20

Frequently Bought Together

Front Bumper and Radiator Support Drive Rivet

Metric Indented Hex Head Bolt with 17mm Washer

Front Fender Push-Type Retainer Nylon 18mm

Steel Expansion Plug Shallow 2-3/8"

Steel Expansion Plug Regular 1-49/64"

Rubber Expansion Plug 1-5/8"

Front Bumper and Radiator Support Drive Rivet

Metric Indented Hex Head Bolt with 17mm Washer

Front Fender Push-Type Retainer Nylon 18mm

Rubber Face Drain Plug M12-1.75 15mm

Aluminum Washers - 20x28

Metric Drain Plug with Gasket M14 x 1.5mm

Front Bumper and Radiator Support Drive Rivet

Metric Indented Hex Head Bolt with 17mm Washer

Front Fender Push-Type Retainer Nylon 18mm

Bumper and Lower Deflector Specialty Rivet 4.8mm

Rocker and Quarter Molding Retainer Plastic

Wall Mount Dispenser for Hand Cleaner

Bumper and Lower Deflector Specialty Rivet 4.8mm

Rocker and Quarter Molding Retainer Plastic

Wall Mount Dispenser for Hand Cleaner

Product Description

• Stamped with fractional and decimal size
1. Clean hole with Tuff-Grit™ Screen Mesh (see Abrasives section).
2. Apply Loctite® 609™ Retaining Compound, Item No. 1143653 (Canada Item No. 1166418 ), around outside of plug.
3. Spread retaining compound around inside hole.
4. Install plugs with proper tooling.

Technical Specifications

Item#:	3055
Style	Concave
Size	1-1/8 "
Material	Steel
Plating	Zinc
UNSPSC #:	25174000
TAA Compliant:	Yes
Weight:	0.62 lb

Suggested Products

Rear Bumper Cover Retainer Plastic 18mm

Bumper and Wheel Well Liner Push-Type Retainer

Fender Apron Drive Rivet 8mm Hole

Engine Under Cover Drive Rivet Plastic 7mm Hole

Cowl Bumper Fender Liner/Engine Under Cover Rivet

Front Fender Push-Type Retainer Nylon 20mm

Drive Rivet Nylon M8

Bumper Push-Type Retainer Nylon 18mm

Bumper Radiator and Grille Drive Rivet 7mm Hole

Push-Type Retainer Nylon 16 x 19mm

Bumper Fascia General Purpose Split Rivet 3/16"

Fender Splash Shield Push Rivet Nylon 7mm Hole

Your Recently Viewed Items