Home Brushes Stemmed Knot-Type Wire Wheel 3"
Brushes
DV_ZoomOriginal_I_91975.jpg
DV_ZoomOriginal_I_91975.jpg
Hardflex® Bi-Metal Reciprocating Saw Blades from Lawson Products

Stemmed Steel Knot-Type Wire Wheel, 0.014" Wire, 3" Outer Diameter, 1/4" Shank Diameter, 7/8" Shank Length, 25000RPM Speed
(Pack of 1)

Regency®

• Outlast standard brushes by at least 2-to-1
• High tensile, heat-treated wire for excellent fatigue resistance and fast cutting capabilities
• Provide continuous cutting action, uniform surface contaminant removal and a smooth finish
• Quality is continuously checked during the manufacturing process; brush samples must remain 100% intact when tested at 120% of their rated operating speed
• Unique manufacturing process neatly arranges wire so each tuft contains the same count
• Retaining plate design of knot-type brush provides greater brush efficiency and safety – no sharp corners to damage wire filaments – wire loss is minimal – each round hole secures only one tuft
• Lightweight and well-balanced for smooth performance and less operator fatigue
• Use for the removal of rust, scale, slag, paint, weld spatter and oxidation, heavy-duty cleaning operations, roughening surfaces, surface conditioning, and deburring. For die, mold and tool cleaning, polishing plastic flash, and I.D. pipe cleaning
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.

Read More
Check Availability

California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov

Catalog page#: 10-66

Frequently Bought Together

DV_ZoomOriginal_I_92008M06.jpg

Double Spiral Tube Brush 5/8"

Item#: 92008M06
DV_ZoomOriginal_P_3564.jpg

Double Spiral Tube Brush 1"

Item#: 92010
DV_ZoomOriginal_P_31407.jpg

Single Row Knot-Type Cup Brush 2-3/4"

Item#: 98176
DV_ZoomOriginal_I_P35424.jpg

Aluminum Oxide Grain Locking Grinding Disc 2"

Item#: P35424
DV_ZoomOriginal_I_DY80601264.jpg

Cryobit 1/4" Dia. Maintenance Drill Bit , 135o Split Point, W/ Flats

Item#: DY80601664
DV_ZoomOriginal_I_59460.jpg

M2 Sheet Metal Hole Cutter 5/16"

Item#: 59460
DV_ZoomOriginal_I_KT13409.jpg

Nylon Cable Tie 11-3/4" Black

Item#: KT13409
DV_ZoomOriginal_I_P15599.jpg

Front Bumper Push-Type Retainer Nylon 20mm

Item#: P15599
DV_ZoomOriginal_I_P85035.jpg

Air Distributor Defroster Push-Type Retainer

Item#: P85035
DV_ZoomOriginal_I_KT12707.jpg

Abrasive Bristle Wire Belt Steel 23mm

Item#: KT12707
DV_ZoomOriginal_I_P68272_WB.jpg

Twist-On Abrasive Disc 2"

Item#: P68272
DV_ZoomOriginal_P_HT5156.jpg

Large Index-Tend Pry Bar

Item#: DY89320018
DV_ZoomOriginal_P_31409.jpg

Stringer Bead Twist Knot-Type Wire Wheel 4"

Item#: 54610
DV_ZoomOriginal_P_3976.jpg

Wide Face Crimped Wire Wheel 10"

Item#: 89191
DV_ZoomOriginal_P_CTPMP1069.jpg

Stringer Wire Wheel 4" Dia, .020" SS Wire Dia., 5/8"-11 Arbor

Item#: DY83334410

Product Description

• Outlast standard brushes by at least 2-to-1
• High tensile, heat-treated wire for excellent fatigue resistance and fast cutting capabilities
• Provide continuous cutting action, uniform surface contaminant removal and a smooth finish
• Quality is continuously checked during the manufacturing process; brush samples must remain 100% intact when tested at 120% of their rated operating speed
• Unique manufacturing process neatly arranges wire so each tuft contains the same count
• Retaining plate design of knot-type brush provides greater brush efficiency and safety – no sharp corners to damage wire filaments – wire loss is minimal – each round hole secures only one tuft
• Lightweight and well-balanced for smooth performance and less operator fatigue
• Use for the removal of rust, scale, slag, paint, weld spatter and oxidation, heavy-duty cleaning operations, roughening surfaces, surface conditioning, and deburring. For die, mold and tool cleaning, polishing plastic flash, and I.D. pipe cleaning
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.

Technical Specifications

Item#: 91975
Type Knot-Type
Style Stemmed
Material Steel
O.D. 3 "
Wire Gauge 0.014 "
Maximum RPM 25,000
Shank Size 1/4 "
Shank Length 7/8 "
Face Width 3/8 "
UNSPSC #: 27111907
TAA Compliant: Yes
Weight: 0.37 lb

Product Restrictions

California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov

Suggested Products

DV_ZoomOriginal_I_95392.jpg

Curved Wood Handle Scratch Brush

Item#: 95392
DV_ZoomOriginal_I_PM08154300.jpg

Twist Knot Wire Wheel 3" Dia., .014" Wire Dia., 1/4" Shank

Item#: PM08154300
DV_ZoomOriginal_I_91976.jpg

Steel Crimped Cup Brush 1-3/4"

Item#: 91976
DV_ZoomOriginal_P_31404.jpg

Steel Crimped End Brush 1/2"

Item#: 95137
DV_ZoomOriginal_I_92007M03.jpg

Double Spiral Tube Brush 1/2"

Item#: 92007M03
DV_ZoomOriginal_I_92035.jpg

Curved Wood Handle Scratch Brush

Item#: 92035
DV_ZoomOriginal_P_3245.jpg

Stemmed Crimped Wire Wheel 2"

Item#: 98191
DV_ZoomOriginal_P_1062.jpg

ConFlex Encapsulated Wire Wheel 2"

Item#: 91992
DV_ZoomOriginal_I_92008M03.jpg

Double Spiral Tube Brush 5/8"

Item#: 92008M03
DV_ZoomOriginal_P_3245.jpg

Stemmed Crimped Wire Wheel 3"

Item#: 89196
DV_ZoomOriginal_P_31402.jpg

Steel Circular Flared End Brush 3"

Item#: 98190
DV_ZoomOriginal_I_91986.jpg

Standard Twist Knot-Type Wire Wheel 3"

Item#: 91986

Your Recently Viewed Items