Tapered Anchor Bolt Steel 3/8 x 4"
(Pack of
5.0)
• Heat-treated, zinc-plated Grade 5 bolt
• Removable and reusable
• No unsightly threads protruding
• Excellent performance in high vibration
• Bolt size is hole size
• Pre-assembled with expansion nut
• Equal force all around
• Applications: Pallet racking crane rail, tilt wall, machinery and highway safety
Installation Procedure
1. Drill hole same diameter as Tapered Anchor Bolt, using fixture as a template.
2. Drive Tapered Anchor Bolt into place, leaving recommended head clearance. If hole is oversized, remove and pre-expand the nut to fit hole.
3. Tighten to recommended number of turns and/or torque. For big jobs, use impact wrench for greater speed and consistency.
4. When removal is needed, simply unscrew it. Bolt can then be reinserted and torqued to original holding power. To use in another hole, simply add a new expander nut.
Ultimate tensile strength and ultimate shear strength values shown: a 4:1 safety factor is recommended.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
Double Expansion Shield Anchor Alloy Steel 5/8"
Couldn't load pickup availability
Masonry Sleeve Anchor Steel 1/4 x 2-1/4"
Couldn't load pickup availability
Masonry Anchor Hex Washer Head Steel 1/4 x 1"
Couldn't load pickup availability
Serrated Hex Flange Nut Alloy Steel M10-1.25
Couldn't load pickup availability
Open End Rivet Dome Head Aluminum 5/32"
Couldn't load pickup availability
Self-Drilling Screw Phillips #10-16 x 3/4"
Couldn't load pickup availability
Rocker Molding Clip with Sealer Nylon Gray 12mm
Couldn't load pickup availability
Rivet Nylon 1/4"
Couldn't load pickup availability
Bumper Drive Rivet Plastic 10mm Hole
Couldn't load pickup availability
Expander Nut for Tapered Anchor Bolt 1/2"
Couldn't load pickup availability
Tapered Anchor Bolt Steel 1/2 x 5"
Couldn't load pickup availability
Expander Nut for Tapered Anchor Bolt 3/8"
Couldn't load pickup availability
Product Description
• Heat-treated, zinc-plated Grade 5 bolt• Removable and reusable
• No unsightly threads protruding
• Excellent performance in high vibration
• Bolt size is hole size
• Pre-assembled with expansion nut
• Equal force all around
• Applications: Pallet racking crane rail, tilt wall, machinery and highway safety
Installation Procedure
1. Drill hole same diameter as Tapered Anchor Bolt, using fixture as a template.
2. Drive Tapered Anchor Bolt into place, leaving recommended head clearance. If hole is oversized, remove and pre-expand the nut to fit hole.
3. Tighten to recommended number of turns and/or torque. For big jobs, use impact wrench for greater speed and consistency.
4. When removal is needed, simply unscrew it. Bolt can then be reinserted and torqued to original holding power. To use in another hole, simply add a new expander nut.
Ultimate tensile strength and ultimate shear strength values shown: a 4:1 safety factor is recommended.
Technical Specifications
| Item#: | 94997 |
|---|---|
| Diameter | 3/8 " |
| Length | 4 " |
| Finish | Zinc |
| Minimum Embedment | 1-7/8 " |
| Ultimate Tensile Strength In 3,000 PSI Concrete | 4,030 lb |
| Ultimate Shear Strength In 3,000 PSI Concrete | 7,177 lb |
| Required Torque to Set | 40 ft·lbf |
| Grade | 5 |
| Material | Steel |
| Type | Tapered Anchor Bolt |
| Size | 3/8X4 " |
| Head Height | 3/16 " |
| Drill Size | 3/8 " |
| UNSPSC #: | 31162101 |
| TAA Compliant: | Yes |
| Weight: | 0.77 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
