Terminal Crimp Frame
(Pack of
1.0)
• Professional tool incorporating a single frame with several interchangeable dies
• Full cycle ratchet with safety release
• High-quality electrical and mechanical crimps are made simultaneously
• Crimps meet or exceed industry standards
• Assures a positive mechanical and electrical crimp and ease of use
• Crimping dies can be easily switched with two screws
The die will slide out towards the front of the frame simply by loosening the two socket head screws and removing them.
To replace the die1. Simply extend the frame to its full open position.2. Close the frame approximately halfway. 3. Insert the die into the frame until it stops. All dies can be inserted only one way for the tool to close properly.4. Tighten the screws approximately halfway. 5. Close the frame to press the dies against each other. This helps to align the dies in the frame.6. Finish tightening the screws. 7. Frame and tool are complete and ready for use.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
Crimping Tool 26-10 AWG
Couldn't load pickup availability
O-Ring Repair Kit
Couldn't load pickup availability
1/0 50mm Replacement Die
Couldn't load pickup availability
Super Magna-Crimp Ratcheted Crimping Tool For 26 - 6 Gauge
Couldn't load pickup availability
Heat Shrink Torch with Fuel Cell Refillable
Couldn't load pickup availability
Terminal Crimp Tool with Die RG58/RG62
Couldn't load pickup availability
Pneumatic Cut-Off Tool with Aluminum Oxide Cut-Off Wheels
Couldn't load pickup availability
18V 2-Tool Drill & Fastening Tool Kit
Couldn't load pickup availability
Twist-On Holding Pad 30000rpm 2"
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Fender Bumper Shield Retainer 11/16"
Couldn't load pickup availability
Specialty Rivet with Plastic Cap Aluminum 3.2mm
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 3/8" (M10)
Couldn't load pickup availability
Interchangeable Hex Bit Set 24Pc SAE
Couldn't load pickup availability
Master Security Bit Set 203Pc
Couldn't load pickup availability
Product Description
• Professional tool incorporating a single frame with several interchangeable dies• Full cycle ratchet with safety release
• High-quality electrical and mechanical crimps are made simultaneously
• Crimps meet or exceed industry standards
• Assures a positive mechanical and electrical crimp and ease of use
• Crimping dies can be easily switched with two screws
The die will slide out towards the front of the frame simply by loosening the two socket head screws and removing them.
To replace the die1. Simply extend the frame to its full open position.2. Close the frame approximately halfway. 3. Insert the die into the frame until it stops. All dies can be inserted only one way for the tool to close properly.4. Tighten the screws approximately halfway. 5. Close the frame to press the dies against each other. This helps to align the dies in the frame.6. Finish tightening the screws. 7. Frame and tool are complete and ready for use.
Technical Specifications
| Item#: | 95102 |
|---|---|
| Type | Crimp Die |
| Style | Terminal Connector Crimping System |
| Description | Frame Only |
| UNSPSC #: | 27111500 |
| TAA Compliant: | Yes |
| Weight: | 1.64 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
