Terminal Crimping Tool with Interchangeable Die, RG58/RG62, Full Cycle Ratchet, Suitable for BNC and TNC Coaxial Connectors
(Pack of
1)
SKU:95110 Item#: 95110
• Professional tool incorporating a single frame with several interchangeable dies
• Full cycle ratchet with safety release
• High-quality electrical and mechanical crimps are made simultaneously
• Crimps meet or exceed industry standards
• Assures a positive mechanical and electrical crimp and ease of use
• Crimping dies can be easily switched with two screws
The die will slide out towards the front of the frame simply by loosening the two socket head screws and removing them.
To replace the die
1. Simply extend the frame to its full open position.
2. Close the frame approximately halfway.
3. Insert the die into the frame until it stops. All dies can be inserted only one way for the tool to close properly.
4. Tighten the screws approximately halfway.
5. Close the frame to press the dies against each other. This helps to align the dies in the frame.
6. Finish tightening the screws.
7. Frame and tool are complete and ready for use.
Frequently Bought Together
2GA/25mm Replacement Die
$0.00
Couldn't load pickup availability
Crimping Tool Pin and Socket 12-24 AWG
$0.00
Couldn't load pickup availability
Selectakrimp™ Hand Crimping Tool 6-4/0 AWG
$0.00
Couldn't load pickup availability
Crimping Tool Forged 22-10 AWG
$0.00
Couldn't load pickup availability
Visa Ratchet Crimping Tool 22-10 AWG
$0.00
Couldn't load pickup availability
Terminal Crimp Die 22-10 AWG
$0.00
Couldn't load pickup availability
Wire Stripper-Cutter 6" Stainless Steel Jaws
$0.00
Couldn't load pickup availability
Pneumatic Impact Wrench, 1/2 Drive Max Torque 730 lbs
$0.00
Couldn't load pickup availability
1/4" Air Impact Screwdriver
$0.00
Couldn't load pickup availability
Shield Push-Type Retainer with Metal Insert
$0.00
Couldn't load pickup availability
Rocker Panel Molding Clip Nylon White 12 x 20mm
$0.00
Couldn't load pickup availability
Front Bumper Trim Panel/Running Board Split Rivet
$0.00
Couldn't load pickup availability
Autobahn Ergo Magna EZ Crimper Ratcheting Terminal Crimper
$0.00
Couldn't load pickup availability
3" Pneumatic Cut-Off Tool
$0.00
Couldn't load pickup availability
18" Locking Smooth Operator Clamp
$0.00
Couldn't load pickup availability
Product Description
• Professional tool incorporating a single frame with several interchangeable dies• Full cycle ratchet with safety release
• High-quality electrical and mechanical crimps are made simultaneously
• Crimps meet or exceed industry standards
• Assures a positive mechanical and electrical crimp and ease of use
• Crimping dies can be easily switched with two screws
The die will slide out towards the front of the frame simply by loosening the two socket head screws and removing them.
To replace the die
1. Simply extend the frame to its full open position.
2. Close the frame approximately halfway.
3. Insert the die into the frame until it stops. All dies can be inserted only one way for the tool to close properly.
4. Tighten the screws approximately halfway.
5. Close the frame to press the dies against each other. This helps to align the dies in the frame.
6. Finish tightening the screws.
7. Frame and tool are complete and ready for use.
Technical Specifications
| Item#: | 95110 |
|---|---|
| Type | Crimping Tool |
| Style | Terminal Connector Crimping System |
| Size | 58/62 |
| Description | Tool with 95105 Die |
| UNSPSC #: | 27111500 |
| TAA Compliant: | Yes |
| Weight: | 1.82 lb |
