Thin Wiggle Wire 16 AWG
(Pack of 1)

Kent Automotive

Wiggle Wire is used for crease pulling and rocker panel automotive body repair.
• Thin wire has approximately 60 pieces per 1 lb. package
1. Weld wire to the dent or crease over a series of points.
2. Connect a hook, slide hammer or other pulling tools to pull dents and creases out of panels.
3. Easy removal – breaks right off.

Check Availability

Quantity

California Proposition 65: Not Applicable
www.P65Warnings.ca.gov

Catalog page#: 10-57

Frequently Bought Together

Rear Bumper Cover Retainer Plastic 18mm

Bumper and Wheel Well Liner Push-Type Retainer

Engine Under Cover Drive Rivet Plastic 7mm Hole

Fiberglass Paint Booth Filter Roll

Thick Wiggle Wire 12 AWG

Plastic Spreader 5"

Rear Bumper Cover Retainer Plastic 18mm

Bumper and Wheel Well Liner Push-Type Retainer

Engine Under Cover Drive Rivet Plastic 7mm Hole

Rear Bumper Cover Retainer Plastic 18mm

Bumper and Wheel Well Liner Push-Type Retainer

Acrysol Paint Preparation and Auto Body Solvent

Acrysol Paint Preparation and Auto Body Solvent

Acrysol Auto Body Degreaser 16oz

High-Tech Seam Sealer Clear 5fl.oz

Fiberglass Paint Booth Filter Roll

Thick Wiggle Wire 12 AWG

Plastic Spreader 5"

Product Description

Wiggle Wire is used for crease pulling and rocker panel automotive body repair.
• Thin wire has approximately 60 pieces per 1 lb. package
1. Weld wire to the dent or crease over a series of points.
2. Connect a hook, slide hammer or other pulling tools to pull dents and creases out of panels.
3. Easy removal – breaks right off.

Technical Specifications

Item#:	1556087
Material	Mild Steel Copper Coated
Diameter	1/16 (0.062) "
Description	Thin
Wire Length	12" to 13 "
UNSPSC #:	25172502
TAA Compliant:	Yes
Weight:	1.0 lb

Product Restrictions

California Proposition 65: Not Applicable
www.P65Warnings.ca.gov

Suggested Products

Rear Bumper Cover Retainer Plastic 18mm

Bumper and Wheel Well Liner Push-Type Retainer

Engine Under Cover Drive Rivet Plastic 7mm Hole

Woven Polyester Electrical Tape 19mm x 25m

Bumper Fascia General Purpose Split Rivet 3/16"

Fender Apron Drive Rivet 8mm Hole

Fender Bumper Shield Retainer 11/16"

Front Fender Push-Type Retainer Nylon 20mm

Drive Rivet Nylon M8

Specialty Rivet with Plastic Cap Aluminum 3.2mm

Inner Fender Shield Attaching Clip Nylon Black

Bumper Radiator and Grille Drive Rivet 7mm Hole

Your Recently Viewed Items