ASTM A-193 Threaded Stud, Grade B7, Alloy Steel, Plain Finish, Coarse Thread, 125000PSI Strength, 1/2-13 x 4"
(Pack of
10)
SKU:96408 Item#: 96408
• Unplated
• Stamped B7 on one end for material identification purposes
• Fully chamfered ends
• UNC coarse threads
• Conforms to ASTM A193 and ASME SA193 B7 specifications
• 125,000 PSI minimum tensile strength at room temperature. For maximum allowable stress value at specific temperatures, refer to ASME Boiler and Pressure Code Section VIII.
Used in most piping and flange applications requiring a high-strength ferrous steel bolt capable of operating in a temperature range of –20°F to +750°F (–29°C to +399°C) when used with Grade 2H nuts.
Frequently Bought Together
Hex Flange Bolt Grade 10.9 M6-1 x 12mm
$0.00
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M6-1 x 25mm
$0.00
Couldn't load pickup availability
Hex Nut Grade 8 Alloy Steel 1/4-20
$0.00
Couldn't load pickup availability
B7 Full Thread Stud 5/8-11 Diameter, 3-1/2" Length
$0.00
Couldn't load pickup availability
B7 Full Thread Stud 3/4-10 Diameter, 5-3/4" Length
$0.00
Couldn't load pickup availability
B7 Full Thread Stud 3/4-10 Diameter, 5-1/4" Length
$0.00
Couldn't load pickup availability
Front/Rear Bumper Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Bumper Clip Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Front Bumper Trim Panel/Running Board Split Rivet
$0.00
Couldn't load pickup availability
B7 Full Thread Stud 3/4-10 Diameter, 5-1/4" Length
$0.00
Couldn't load pickup availability
B7 Full Thread Stud 3/4-10 Diameter, 4-1/4" Length
$0.00
Couldn't load pickup availability
B7 Full Thread Stud 3/4-10 Diameter, 3-3/4" Length
$0.00
Couldn't load pickup availability
Product Description
• Unplated• Stamped B7 on one end for material identification purposes
• Fully chamfered ends
• UNC coarse threads
• Conforms to ASTM A193 and ASME SA193 B7 specifications
• 125,000 PSI minimum tensile strength at room temperature. For maximum allowable stress value at specific temperatures, refer to ASME Boiler and Pressure Code Section VIII.
Used in most piping and flange applications requiring a high-strength ferrous steel bolt capable of operating in a temperature range of –20°F to +750°F (–29°C to +399°C) when used with Grade 2H nuts.
Technical Specifications
| Item#: | 96408 |
|---|---|
| Diameter | 1/2 " |
| Thread Pitch | 13 |
| Thread | Coarse |
| Length | 4 " |
| Grade | B7 |
| Material | Alloy Steel |
| Finish | Plain |
| Type | B7 Alloy Studs |
| Strength | 125,000 PSI |
| Specifications | ASTM A 193 B7 |
| Size | 1/2X4 " |
| UNSPSC #: | 31163300 |
| TAA Compliant: | No |
| Weight: | 1.83 lb |
