Tru-Shrink Heat Shrink Tubing 10 to 8 AWG Black
(Pack of
10)
2:1 shrink ratio
Easily assembled over components, connectors or other irregular shapes
Flame-retardant
Non-corrosive
Non-nutrient fungus resistant
Excellent fluid resistance
Meets or exceeds MIL-1-23053 D/5, Class I, II and III; AMS 3636C and AMS 3637B requirements
Tensile strength: 1,500 PSI
Elongation: 200%
Dielectric strength: 500V/mil
Volume resistivity: 1015 Ohm/cm
Heat shock: Four hours at 482°F (250°C)
Low temperature flexibility: Four hours at 67°F (55°C)
Longitudinal change: Less than 5%
Secant modulus: 12,000 PSI
Rated at 600V
Use as electrical insulation over cable splices and terminations, and for wire harness covering, bundling and wire marker identification
Wire gauge coverage is approximate due to the wide variance of wire thicknesses.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog page#: 2-6
Frequently Bought Together

Butt Connector 16 to 14 AWG
Couldn't load pickup availability

ATO/ATC Fuse 15A Light Blue
Couldn't load pickup availability

Super 33 Vinyl Electrical Tape Black 3/4" x 20'
Couldn't load pickup availability

3/8 x 4" Red Thermapod Heat Shrink Tube
Couldn't load pickup availability

Heat Shrink Tubing Clear 0.6 x 12"
Couldn't load pickup availability

Flow Form Heat Shrink Tubing 2 to 4/0 AWG Black
Couldn't load pickup availability

Molding Clip with Sealer Nylon White 10 x 12mm
Couldn't load pickup availability

Wheel Flare Molding Clip with Sealer Nylon
Couldn't load pickup availability

Metric Indented Hex Head Bolt with 17mm Washer
Couldn't load pickup availability

Super 88 Series Vinyl Electrical Tape Black 3/4"
Couldn't load pickup availability

3/4" Installation Tool Zipshield Harness Wrap
Couldn't load pickup availability

Rubber Grommet 3/4" ID
Couldn't load pickup availability
Product Description
2:1 shrink ratio Easily assembled over components, connectors or other irregular shapes
Flame-retardant
Non-corrosive
Non-nutrient fungus resistant
Excellent fluid resistance
Meets or exceeds MIL-1-23053 D/5, Class I, II and III; AMS 3636C and AMS 3637B requirements
Tensile strength: 1,500 PSI
Elongation: 200%
Dielectric strength: 500V/mil
Volume resistivity: 1015 Ohm/cm
Heat shock: Four hours at 482°F (250°C)
Low temperature flexibility: Four hours at 67°F (55°C)
Longitudinal change: Less than 5%
Secant modulus: 12,000 PSI
Rated at 600V
Use as electrical insulation over cable splices and terminations, and for wire harness covering, bundling and wire marker identification
Wire gauge coverage is approximate due to the wide variance of wire thicknesses.
Technical Specifications
Item#: | 61659 |
---|---|
Type | Pre-Cut |
Style | Thin Wall |
Wire Gauge Coverage | 10-8 AWG |
Diameter | 3/8 " |
Length | 6 " |
Color | Black |
I.D. Before Shrinkage | 0.375 " |
I.D. After Shrinkage | 0.187 " |
Wall Thickness After Shrinkage | 0.025 " |
Dielectric Strength | 500 V/mm |
Voltage Rating | 600 V |
Elongation | 200 % |
Tensile Strength | 1,500 PSI |
Heat Shock | 4 hours at 482 degrees F |
Secant Modulus | 12,000 PSI |
Longitudinal Change | Less than 5% |
Approvals | CSA, UR and Meets or exceeds MIL-1-23053 D/5, Class I, II and II; AMS 3636C and AMS 3637B requirements |
UNSPSC #: | 39121723 |
TAA Compliant: | No |
Weight: | 0.09 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
