Two-Ear Hose Clamp 1.220 to 1.339"
(Pack of
10.0)
Medium-pressure clamp, installed on air, fluid, gas and steam lines
One-piece design offers a positive, tamper-proof seal without damaging the hose
Assures adequate closure and compensates for tolerance variations in hose sizes
Zinc-plated steel
Widely used for maintenance and OEM applications
Suitable for low-pressure hydraulic use
Can be used to clamp rubber hose, plastic tubing, rope, coaxial and electrical cable, and more
NOTE: Select nominal size nearest to, but always larger than, O.D. of material to be clamped after fitting has been inserted.
Reference No. is stamped on band of hose clamp.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog Page#: 7-7
Frequently Bought Together

Spring Loaded T-Bolt Hose Clamp, Dia: 2.06 - 2.38"
Couldn't load pickup availability

Band-It Clamp High-Carbon Steel 4-1/2 x 5/8"
Couldn't load pickup availability

Constant Torque Hose Clamp SS 1 to 1-3/4"
Couldn't load pickup availability

DOT Transmission Connector Male Brass 1/16 x 5/32"
Couldn't load pickup availability

DOT Transmission Connector Male Brass 1/16 x 1/8"
Couldn't load pickup availability

Air Brake Tank Filler Valve Brass 1/4-18
Couldn't load pickup availability

Constant Torque Hose Clamp SS 2-3/4 to 3-5/8"
Couldn't load pickup availability

H23910-250R
Couldn't load pickup availability

H56904
Couldn't load pickup availability

Rubber Air Hose Bulk 1/4" x 300'
Couldn't load pickup availability

Rubber Air Hose Assembly 1/2" x 100'
Couldn't load pickup availability

Blushield Rubber Pressure Washer Hose Assembly 1/4" x 50'
Couldn't load pickup availability

Fender Bumper Shield Retainer 11/16"
Couldn't load pickup availability

Push-Type Retainer Nylon 16 x 19mm
Couldn't load pickup availability

Cowl Bumper Fender Liner/Engine Under Cover Rivet
Couldn't load pickup availability
Product Description
Medium-pressure clamp, installed on air, fluid, gas and steam lines One-piece design offers a positive, tamper-proof seal without damaging the hose
Assures adequate closure and compensates for tolerance variations in hose sizes
Zinc-plated steel
Widely used for maintenance and OEM applications
Suitable for low-pressure hydraulic use
Can be used to clamp rubber hose, plastic tubing, rope, coaxial and electrical cable, and more
NOTE: Select nominal size nearest to, but always larger than, O.D. of material to be clamped after fitting has been inserted.
Reference No. is stamped on band of hose clamp.
Technical Specifications
Item#: | 96643 |
---|---|
Category | Two-Ear Hose Clamps |
SAE Size | 34 |
Material | Zinc Plated Steel |
Size | 1-5/16 " |
Minimum Diameter | 1.220 " |
Maximum Diameter | 1.339 " |
Width | 0.394 " |
Thickness | 0.0591 " |
Inner Width of Ear | 0.2950 " |
UNSPSC #: | 31162906 |
TAA Compliant: | Yes |
Weight: | 0.34 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov

