Flat Washer, USS, Thru-Hardened, Steel, Zinc Finish, 33/64" ID, 1-3/8" OD, 9/64" Thickness, 1/2"
(Pack of
100)
• Designed and engineered for use with Tru-Torq® and Tuff-Torq® fastening systems
• Greater thickness with more closely held tolerances than standard washers – tight inside diameter tolerance prevents system mismatch
• Smooth bearing surfaces
• Manufacturing lot control traceability
• Hardened and tempered; will support 180,000 PSI minimum strength
• Exceeds SAE and ASTM F436 specifications
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog page#: 11-11
Frequently Bought Together
Hex Flange Bolt Grade 10.9 M10-1.25 x 40mm
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M10-1.25 x 45mm
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M6-1 x 45mm
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 1/2"
Couldn't load pickup availability
USS Flat Washer Thru-Hardened Steel 3/8"
Couldn't load pickup availability
Flat Washer 18-8 Stainless Steel #10
Couldn't load pickup availability
Miniature Incandescent Bulb 12V 2CP
Couldn't load pickup availability
Front Bumper Drive Rivet Plastic 10mm Hole
Couldn't load pickup availability
Front Bumper Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
DIN 125A Flat Washer A2 Stainless Steel M10
Couldn't load pickup availability
DIN 125A Flat Washer Grade 140 HV M5
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 3/8"
Couldn't load pickup availability
Product Description
• Designed and engineered for use with Tru-Torq® and Tuff-Torq® fastening systems• Greater thickness with more closely held tolerances than standard washers – tight inside diameter tolerance prevents system mismatch
• Smooth bearing surfaces
• Manufacturing lot control traceability
• Hardened and tempered; will support 180,000 PSI minimum strength
• Exceeds SAE and ASTM F436 specifications
Technical Specifications
| Item#: | 88449 |
|---|---|
| Nominal Size | 1/2 " |
| Grade | Thru-Hardened |
| Finish | Bright Zinc |
| Type | Flat Washer |
| I.D. | 33/64 " |
| O.D. | 1-3/8 " |
| Thickness | 9/64 " |
| Material | Carbon Steel |
| Minimum Thickness | .122 " |
| Maximum Thickness | .146 " |
| Pattern | USS |
| Quantity Per Package | 100.0000 |
| UNSPSC #: | 31161807 |
| TAA Compliant: | Yes |
| Weight: | 4.49 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
