Wedge Type Stud Bolt Anchor SS 1/2 x 3-3/4"
(Pack of
5.0)
Available in zinc-plated steel and stainless steel
1. Drill hole of proper diameter in concrete. Drilled hole can be any depth beyond minimum recommended depth.
2. Drive Wedge Anchor into drilled hole through fixture until nut is flush with fixture.
3. Tighten nut until wrench resistance is felt (approximately three to four full turns past the hand-tight position). Anchoring is now complete.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together

Masonry Anchor Assortment 243Pcs
Couldn't load pickup availability

Light-Medium Duty Anchor Assortment 555Pcs
Couldn't load pickup availability

Wallboard Anchor Assortment 1125Pcs
Couldn't load pickup availability

Lockbolt Collar Standard Flange Aluminum 3/16"
Couldn't load pickup availability

Hex Flange Bolt Grade 10.9 M10-1.25 x 25mm
Couldn't load pickup availability

Serrated Hex Flange Nut Alloy Steel M10-1.25
Couldn't load pickup availability

Front Fender Liner Push-Type Retainer Nylon 20mm
Couldn't load pickup availability

Front Bumper Specialty Nut Steel M4.2-1.41
Couldn't load pickup availability

Nylon Cable Tie 7-1/2" Black
Couldn't load pickup availability

Wedge Type Anchor Bolt Steel 1/4 x 3"
Couldn't load pickup availability

Wedge Type Stud Bolt Anchor SS 3/4 x 4-1/4"
Couldn't load pickup availability

Wedge Type Anchor Bolt Steel 1/2 x 3-1/2"
Couldn't load pickup availability
Product Description
Available in zinc-plated steel and stainless steel1. Drill hole of proper diameter in concrete. Drilled hole can be any depth beyond minimum recommended depth.
2. Drive Wedge Anchor into drilled hole through fixture until nut is flush with fixture.
3. Tighten nut until wrench resistance is felt (approximately three to four full turns past the hand-tight position). Anchoring is now complete.
Technical Specifications
Item#: | 91630 |
---|---|
Diameter | 1/2 " |
Length | 3-3/4 " |
Thread Length | 2-1/8 " |
Drill Size | 1/2 " |
Material | Stainless Steel |
Finish | Plain |
Type | Wedge Anchor |
Proof Test Load | 3,400 lb |
Length Identification Code | E |
Size | 1/2X3-3/4 " |
Minimum Embedment | 2-1/8 " |
UNSPSC #: | 31162101 |
TAA Compliant: | No |
Weight: | 1.12 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov



