Wedge Type Stud Bolt Anchor SS 3/4 x 4-1/4"
(Pack of
2.0)
• Available in zinc-plated steel and stainless steel
1. Drill hole of proper diameter in concrete. Drilled hole can be any depth beyond minimum recommended depth.
2. Drive Wedge Anchor into drilled hole through fixture until nut is flush with fixture.
3. Tighten nut until wrench resistance is felt (approximately three to four full turns past the hand-tight position). Anchoring is now complete.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
Masonry Anchor Hex Washer Head Steel 1/4 x 1"
Couldn't load pickup availability
Masonry Anchor Star Head Steel 1/4 x 1-3/4"
Couldn't load pickup availability
Sleeve Type Stud Bolt Anchor Steel 5/16 x 3-1/2"
Couldn't load pickup availability
Hex Cap Screw Property Class 8.8 M6-1 x 16mm
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M10-1.25 x 20mm
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M10-1.25 x 40mm
Couldn't load pickup availability
Utility Knife, Folding , 4" Closed
Couldn't load pickup availability
Fender Splash Shield Retainer Nylon 20mm
Couldn't load pickup availability
Rocker Molding Clip with Sealer Nylon Gray 12mm
Couldn't load pickup availability
Wedge Type Anchor Bolt Steel 3/4 x 4"
Couldn't load pickup availability
Wedge Type Stud Bolt Anchor Steel 5/8 x 8-1/2"
Couldn't load pickup availability
Wedge Type Stud Bolt Anchor SS 1/4 x 2-1/4"
Couldn't load pickup availability
Product Description
• Available in zinc-plated steel and stainless steel1. Drill hole of proper diameter in concrete. Drilled hole can be any depth beyond minimum recommended depth.
2. Drive Wedge Anchor into drilled hole through fixture until nut is flush with fixture.
3. Tighten nut until wrench resistance is felt (approximately three to four full turns past the hand-tight position). Anchoring is now complete.
Technical Specifications
| Item#: | 91635 |
|---|---|
| Diameter | 3/4 " |
| Length | 4-1/4 " |
| Thread Length | 2 " |
| Drill Size | 3/4 " |
| Material | Stainless Steel |
| Finish | Plain |
| Type | Wedge Anchor |
| Proof Test Load | 6,800 lb |
| Length Identification Code | F |
| Size | 3/4X4-1/4 " |
| Minimum Embedment | 3-1/4 " |
| UNSPSC #: | 31162101 |
| TAA Compliant: | No |
| Weight: | 1.31 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
