Home Tools Cutting Tools Brushes Wire Wheel Wide Face Crimped Wire Wheel 6"
Brushes
DV_ZoomOriginal_I_91983.jpg
DV_ZoomOriginal_I_91983.jpg

Stainless Steel Wide Face Crimped Wire Wheel, 0.014" Wire, 1/2", 5/8" and 2" Arbor, 6" Outer Diameter, 6000RPM Operating Speed
(Pack of 1)

Item#: 91983

Regency®

• Outlast standard brushes by at least 2-to-1
• High tensile, heat-treated wire for excellent fatigue resistance and fast cutting capabilities
• Provide continuous cutting action, uniform surface contaminant removal and a smooth finish
• Quality is continuously checked during the manufacturing process; brush samples must remain 100% intact when tested at 120% of their rated operating speed
• Unique manufacturing process neatly arranges wire so each tuft contains the same count
• Stainless steel brushes are used where contamination or rust is a problem, for example, brushing aluminum or stainless steel parts
• Wire springs back and is consistently crimped and cut to precise length
• Filaments are securely held in place with a solid steel retaining ring
• Use for roughening for adhesion, surface preparation prior to plating or painting, edge blending, cleaning off rust, scale and dirt, finishing for appearance and deburring
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.

Read More
Check Availability

California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov

Frequently Bought Together

DV_ZoomOriginal_I_PM08154300.jpg

Twist Knot Wire Wheel 3" Dia., .014" Wire Dia., 1/4" Shank

Item#: PM08154300
DV_ZoomOriginal_I_95392.jpg

Curved Wood Handle Scratch Brush

Item#: 95392
DV_ZoomOriginal_P_3245.jpg

Stemmed Crimped Wire Wheel 2"

Item#: 98191
DV_ZoomOriginal_I_P67476.jpg

Sheet Metal Drill Bit Alloy Steel 1/4"

Item#: P67476
DV_ZoomOriginal_P_3141.jpg

Spot Weld Remover Drill Bit HSS 2-3/4" (M8)

Item#: 54455
DV_ZoomOriginal_I_P67411.jpg

Sheet Metal Drill Bit Alloy Steel 3/16"

Item#: P67411
DV_ZoomOriginal_I_DY81420015.jpg

11Pc Lock and Load Hammer Set

Item#: DY81420015
DV_ZoomOriginal_P_HT5156.jpg

Small Index-Tend Pry Bar

Item#: DY89320015
DV_ZoomOriginal_I_DY81100505.jpg

57Pc Torsion Impact Bit Master Set

Item#: DY81100505
DV_ZoomOriginal_I_P86111.jpg

Cowl Bumper Fender Liner/Engine Under Cover Rivet

Item#: P86111
DV_ZoomOriginal_I_KT11397.jpg

Front Fender Push-Type Retainer Nylon 20mm

Item#: KT11397
DV_ZoomOriginal_I_1500739.jpg

Drive Rivet Nylon M8

Item#: 1500739
DV_ZoomOriginal_I_P67476.jpg

Sheet Metal Drill Bit Alloy Steel 1/4"

Item#: P67476
DV_ZoomOriginal_P_HT5222.jpg

Interchangeable Hex Bit Set 20Pc Torx

Item#: DY89310522
DV_ZoomOriginal_P_HT5273.jpg

Cross-Over Socket Extension Set, 3/8" Drive, 3 Piece

Item#: DY89320050
DV_ZoomOriginal_P_3245.jpg

Stemmed Crimped Wire Wheel 3"

Item#: 89196
DV_ZoomOriginal_P_1062.jpg

ConFlex Encapsulated Wire Wheel 2"

Item#: 91992
DV_ZoomOriginal_P_CTPMP1060.jpg

Twist Knot Wire Wheel 3" Dia., .014" SS Wire Dia., 1/4" Shank

Item#: PM08154305

Product Description

• Outlast standard brushes by at least 2-to-1
• High tensile, heat-treated wire for excellent fatigue resistance and fast cutting capabilities
• Provide continuous cutting action, uniform surface contaminant removal and a smooth finish
• Quality is continuously checked during the manufacturing process; brush samples must remain 100% intact when tested at 120% of their rated operating speed
• Unique manufacturing process neatly arranges wire so each tuft contains the same count
• Stainless steel brushes are used where contamination or rust is a problem, for example, brushing aluminum or stainless steel parts
• Wire springs back and is consistently crimped and cut to precise length
• Filaments are securely held in place with a solid steel retaining ring
• Use for roughening for adhesion, surface preparation prior to plating or painting, edge blending, cleaning off rust, scale and dirt, finishing for appearance and deburring
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.

Technical Specifications

Item#: 91983
Type Crimped
Style Wide Face
Material Stainless Steel
O.D. 6 "
Arbor Size 1/2, 5/8, 2 "
Wire Gauge 0.014 "
Maximum RPM 6,000
Face Width 1-1/8 "
UNSPSC #: 27111907
TAA Compliant: Yes
Weight: 1.88 lb

Product Restrictions

California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov

Suggested Products

DV_ZoomOriginal_I_91975.jpg

Stemmed Knot-Type Wire Wheel 3-1/4"

Item#: 91975
DV_ZoomOriginal_P_31404.jpg

Steel Crimped End Brush 1/2"

Item#: 95137
DV_ZoomOriginal_P_3245.jpg

Stemmed Crimped Wire Wheel 3"

Item#: 89195
DV_ZoomOriginal_I_92035.jpg

Curved Wood Handle Scratch Brush

Item#: 92035
DV_ZoomOriginal_I_PM08154300.jpg

Twist Knot Wire Wheel 3" Dia., .014" Wire Dia., 1/4" Shank

Item#: PM08154300
DV_ZoomOriginal_I_95392.jpg

Curved Wood Handle Scratch Brush

Item#: 95392
DV_ZoomOriginal_P_3245.jpg

Stemmed Crimped Wire Wheel 2"

Item#: 98191
DV_ZoomOriginal_P_3245.jpg

Stemmed Crimped Wire Wheel 3"

Item#: 89196
DV_ZoomOriginal_I_92007M03.jpg

Double Spiral Tube Brush 1/2"

Item#: 92007M03
DV_ZoomOriginal_P_1062.jpg

ConFlex Encapsulated Wire Wheel 2"

Item#: 91992
DV_ZoomOriginal_I_91976.jpg

Steel Crimped Cup Brush 1-3/4"

Item#: 91976
DV_ZoomOriginal_P_CTPMP1060.jpg

Twist Knot Wire Wheel 3" Dia., .014" SS Wire Dia., 1/4" Shank

Item#: PM08154305

Your Recently Viewed Items