Wing-Type Toggle Bolt Anchor Steel 1/4-20 x 6"
(Pack of
25)
Toggle Bolt Assemblies
Better spring action and more thread engagement
1. Insert bolt through item to be fastened, thread on wings, then fold wings completely back and insert through hole until wings spring open.
2. Pull back on assembly to hold wings against inside wall this prevents the wings from spinning while tightening bolt. Tighten bolt firmly with screwdriver.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together

Masonry Anchor Assortment 243Pcs
Couldn't load pickup availability

Wallboard Anchor Assortment 1125Pcs
Couldn't load pickup availability

Masonry Anchor Assortment 243Pcs
Couldn't load pickup availability

Hex Flange Bolt Grade 10.9 M10-1.25 x 50mm
Couldn't load pickup availability

Acorn Nut A2 Stainless Steel M6-1
Couldn't load pickup availability

SAE J995C Locknut with Nylon Insert Grade 8 3/8-16
Couldn't load pickup availability

Front Bumper Specialty Nut Steel M4.2-1.41
Couldn't load pickup availability

Wheel House Molding Split Rivet Aluminum 3/16"
Couldn't load pickup availability

Front Bumper Push-Type Retainer Nylon 20mm
Couldn't load pickup availability

1/4x1-1/4 Yellow Ribbed Wall Anchor
Couldn't load pickup availability

ALLIGATOR® Anchor Nylon #6 to 5/16"
Couldn't load pickup availability

Tamper-Proof Nail Drive Anchor Steel 1/4 x 1-1/2"
Couldn't load pickup availability
Product Description
Toggle Bolt Assemblies Better spring action and more thread engagement
1. Insert bolt through item to be fastened, thread on wings, then fold wings completely back and insert through hole until wings spring open.
2. Pull back on assembly to hold wings against inside wall this prevents the wings from spinning while tightening bolt. Tighten bolt firmly with screwdriver.
Technical Specifications
Item#: | 25152 |
---|---|
Length | 6 " |
Type | Wall Anchor |
Size | 1/4X6 " |
Diameter | 1/4 " |
Material | Steel |
Head Style | Round |
Finish | Zinc |
Thread | Coarse |
Thread Pitch | 20 |
Drill Size | 5/8 " |
Anchor Size | 1/4 x 6 " |
Tensile Proof Test Load In Concrete | 600 lb |
Shear Proof Test Load | 600 lb |
Bolt Size | 1/4-20 x 6 " |
UNSPSC #: | 31162103 |
TAA Compliant: | No |
Weight: | 2.3 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov



