Wing-Type Toggle Bolt Anchor Steel #10-24 x 3"
(Pack of
50.0)
Toggle Bolt Assemblies
• Better spring action and more thread engagement
1. Insert bolt through item to be fastened, thread on wings, then fold wings completely back and insert through hole until wings spring open.
2. Pull back on assembly to hold wings against inside wall – this prevents the wings from spinning while tightening bolt. Tighten bolt firmly with screwdriver.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
Light-Medium Duty Anchor Assortment 555Pcs
Couldn't load pickup availability
Wallboard Anchor Assortment 1125Pcs
Couldn't load pickup availability
Masonry Anchor Assortment 243Pcs
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M6-1 x 30mm
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M10-1.25 x 40mm
Couldn't load pickup availability
Hex Flange Bolt Grade 10.9 M8-1.25 x 35mm
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Cowl Bumper Fender Liner/Engine Under Cover Rivet
Couldn't load pickup availability
Front Bumper Trim Panel/Running Board Split Rivet
Couldn't load pickup availability
Wing-Type Toggle Bolt Anchor Steel 1/4-20 x 3"
Couldn't load pickup availability
Tubular Anchor Plastic Blue #13 to #15
Couldn't load pickup availability
Tubular Anchor Plastic Red #7 to #9
Couldn't load pickup availability
Product Description
Toggle Bolt Assemblies• Better spring action and more thread engagement
1. Insert bolt through item to be fastened, thread on wings, then fold wings completely back and insert through hole until wings spring open.
2. Pull back on assembly to hold wings against inside wall – this prevents the wings from spinning while tightening bolt. Tighten bolt firmly with screwdriver.
Technical Specifications
| Item#: | 25145 |
|---|---|
| Length | 3 " |
| Type | Wall Anchor |
| Size | 3/16X3 " |
| Diameter | 3/16 " |
| Material | Steel |
| Head Style | Mushroom |
| Finish | Zinc |
| Thread Pitch | 24 |
| Drill Size | 1/2 " |
| Anchor Size | 3/16 x 3 " |
| Tensile Proof Test Load In Concrete | 350 lb |
| Shear Proof Test Load | 350 lb |
| Bolt Size | 10-24 (3/16") x 3 " |
| UNSPSC #: | 31162103 |
| TAA Compliant: | No |
| Weight: | 1.69 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
