Wing-Type Toggle Bolt Anchor Steel #6-32 x 3"
(Pack of
50.0)
Toggle Bolt Assemblies
• Better spring action and more thread engagement
1. Insert bolt through item to be fastened, thread on wings, then fold wings completely back and insert through hole until wings spring open.
2. Pull back on assembly to hold wings against inside wall – this prevents the wings from spinning while tightening bolt. Tighten bolt firmly with screwdriver.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
Sleeve Type Stud Bolt Anchor Steel 5/8 x 4-1/4"
Couldn't load pickup availability
Sleeve Type Stud Bolt Anchor Steel 3/8 x 6"
Couldn't load pickup availability
Sleeve Type Stud Bolt Anchor Steel 3/8 x 1-7/8"
Couldn't load pickup availability
SAE Flat Washer Thru-Hardened Steel 1/4"
Couldn't load pickup availability
Conversion Kit #10-32
Couldn't load pickup availability
Hex Cap Screw Property Class 10.9 M6-1 x 16mm
Couldn't load pickup availability
Miniature Incandescent Bulb 12V 2CP
Couldn't load pickup availability
Wheel Flare Molding Clip with Sealer Nylon
Couldn't load pickup availability
Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Wing Type Toggle Bolt Round Head 1/4-20 x 6"
Couldn't load pickup availability
Pin Drive Anchor Mushroom Head Nylon 1/4 x 1/2"
Couldn't load pickup availability
Wing Type Toggle Bolt Round Head #10-24 x 6"
Couldn't load pickup availability
Product Description
Toggle Bolt Assemblies• Better spring action and more thread engagement
1. Insert bolt through item to be fastened, thread on wings, then fold wings completely back and insert through hole until wings spring open.
2. Pull back on assembly to hold wings against inside wall – this prevents the wings from spinning while tightening bolt. Tighten bolt firmly with screwdriver.
Technical Specifications
| Item#: | 25141 |
|---|---|
| Length | 3 " |
| Type | Wall Anchor |
| Size | 1/8X3 " |
| Diameter | 1/8 " |
| Material | Steel |
| Head Style | Mushroom |
| Finish | Zinc |
| Thread Pitch | 32 |
| Drill Size | 3/8 " |
| Anchor Size | 1/8 x 3 " |
| Tensile Proof Test Load In Concrete | 175 lb |
| Shear Proof Test Load | 175 lb |
| Bolt Size | 6-32 (1/8") x 3 " |
| UNSPSC #: | 31162103 |
| TAA Compliant: | No |
| Weight: | 0.81 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
