Copper Coated Outer Tube With Internal Steel Core Rods That Burn At 10000F To Melt Or Liquefy Virtually Any Know Substance
(Pack of
1)
SKU:EG16501436 Item#: EG16501436
This exothermic torch system operates on oxygen alone. The rod is ignited by a spark from a battery or welder. The oxygen reacts with the fuel rods to create a burning reaction hot enough to burn through almost any material. The oxygen jet then blows the molten material away. It will blast through steel, alloy steel, cast iron, manganese, hardfacing, stainless, aluminum, steel-reinforced concrete, composites, refractory brick and even rock.
• Cuts, gouges and pierces almost all materials — steel, steelreinforced concrete, stainless, composites and more!
• Burns through almost anything quickly — faster than a carbonarc or oxy-acetylene torch
• Economical — rods last longer and cut more material than other systems
Frequently Bought Together
3/8" Id Enternal Exothermic Rod Collet
Couldn't load pickup availability
Oxy-Therm Cutting Rod 3/8 x 36"
Couldn't load pickup availability
X-Cut Exothermic Cutting Rod 10,000 Deg Operating Temperature 50/Box
Couldn't load pickup availability
Specialty Rivet with Plastic Cap Aluminum 3.2mm
Couldn't load pickup availability
Front Bumper Trim Panel/Running Board Split Rivet
Couldn't load pickup availability
Acrysol Auto Body Degreaser 16oz
Couldn't load pickup availability
Cronatron Welding Guide
Couldn't load pickup availability
Heat Stick 400F Degrees
Couldn't load pickup availability
710 Stainless Steel Electrode 3/32"
Couldn't load pickup availability
Copper Contact Tip
Couldn't load pickup availability
Green And Red Oxygen And Acetylene Cutting And Welding Hose
Couldn't load pickup availability
Oxy Acetylene Regulator Fuel Flashback Arrestor
Couldn't load pickup availability
Product Description
This exothermic torch system operates on oxygen alone. The rod is ignited by a spark from a battery or welder. The oxygen reacts with the fuel rods to create a burning reaction hot enough to burn through almost any material. The oxygen jet then blows the molten material away. It will blast through steel, alloy steel, cast iron, manganese, hardfacing, stainless, aluminum, steel-reinforced concrete, composites, refractory brick and even rock.• Cuts, gouges and pierces almost all materials — steel, steelreinforced concrete, stainless, composites and more!
• Burns through almost anything quickly — faster than a carbonarc or oxy-acetylene torch
• Economical — rods last longer and cut more material than other systems
Technical Specifications
| Item#: | EG16501436 |
|---|---|
| Welding Process | Exothermic Electrode |
| Type | Cutting Rod |
| Diameter | 1/4 " |
| Length | 36 " |
| UNSPSC #: | 23271700 |
| TAA Compliant: | Yes |
| Weight: | 2.38 lb |
