172 Very Tough Martensite Deposit Polarity Dcep Or Ac Hardness 58Rc Number Of Passes 3 All Position
(Pack of
5)
Produces a very tough martensite deposit that will resist scratching, sliding and gouging abrasion while resisting moderate to heavy impact.
• Tough – Resists cracking, chipping or spalling
• All-Position – Saves time and allows in-position welding
• Super Smooth Welding Arc – Easy to use with a smooth finish
• Economical – Saves money with long lasting overlays
• Multipass overlays
• For use on carbon and abrasion resistant alloy steels including manganese steels
• Generally does not cross-check
• Hardness: 58 Rc
• Machinability: Grind only
• Max Number of Passes: 3
• Current: DCEP (DC+) or AC
• ASTM G65 Abrasion Test: 355.8 mm³ vol. loss
Frequently Bought Together
176 Extreme Abrasion With Impact 1/2X18IN
Couldn't load pickup availability
750 Martensitic Hard Facing Stick Electrode 1/8"
Couldn't load pickup availability
281 Martensitic Stick Rod Electrode 5/32"
Couldn't load pickup availability
750 Martensitic Hard Facing Stick Electrode 1/8"
Couldn't load pickup availability
281 Martensitic Stick Rod Electrode 5/32"
Couldn't load pickup availability
172 Latch Bar And Dutchman Hardfacing Alloy 3/16X18
Couldn't load pickup availability
Bumper and Wheel Well Liner Push-Type Retainer
Couldn't load pickup availability
Engine Under Cover Drive Rivet Plastic 7mm Hole
Couldn't load pickup availability
Bumper Fascia General Purpose Split Rivet 3/16"
Couldn't load pickup availability
ER70S-6 Mild/Carbon Steel MIG Welding Wire 0.03"
Couldn't load pickup availability
ER70S-6 Mild/Carbon Steel MIG Welding Wire 0.023"
Couldn't load pickup availability
Large MIG Plier
Couldn't load pickup availability
Product Description
Produces a very tough martensite deposit that will resist scratching, sliding and gouging abrasion while resisting moderate to heavy impact.• Tough – Resists cracking, chipping or spalling
• All-Position – Saves time and allows in-position welding
• Super Smooth Welding Arc – Easy to use with a smooth finish
• Economical – Saves money with long lasting overlays
• Multipass overlays
• For use on carbon and abrasion resistant alloy steels including manganese steels
• Generally does not cross-check
• Hardness: 58 Rc
• Machinability: Grind only
• Max Number of Passes: 3
• Current: DCEP (DC+) or AC
• ASTM G65 Abrasion Test: 355.8 mm³ vol. loss
Technical Specifications
| Item#: | EG17220000 |
|---|---|
| Welding Process | Stick |
| Type | Electrode |
| Diameter | 3/16 " |
| Base Metal | Steel To Steel |
| Hardness | 58 HRC |
| Polarity | DCEP |
| UNSPSC #: | 23271810 |
| TAA Compliant: | Yes |
| Weight: | 6.66 lb |
