3/4X3-1/8 Drop In Expansion Anchor
(Pack of
5)
SKU:DY09620078 Item#: DY09620078
• An all-steel anchor
• Use with standard bolts for flush mount applications in concrete or masonry
• Designed to provide high holding strength with relatively shallow embedment depths
1. Drill hole 1/8" deeper than anchor length for flush mounting. Where surface deterioration is present, drill hole slightly deeper to permit anchor to be recessed.
2. Drop anchor into hole. If hole is slightly undersized, tap anchor with hammer until it bottoms in hole.
3. To set expander plug, installation tool can be struck a few sharp blows with a hammer, or an automatic air tool or electric tool can be used.
4. Place fixture in position, insert bolt and tighten.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
Frequently Bought Together
Masonry Anchor Hex Washer Head Steel 5/16 x 1-3/4"
Couldn't load pickup availability
Masonry Anchor Phillips Head #14-10 x 2-1/4"
Couldn't load pickup availability
Lag Screw Shield Anchor Long Style 3/8 x 2-1/2"
Couldn't load pickup availability
Drop-In Anchor High Strength 1/4-20 x 1-1/2"
Couldn't load pickup availability
Hex Flange Nut Grade 10 Steel M8-1.25
Couldn't load pickup availability
Serrated Hex Flange Nut Alloy Steel M10-1.25
Couldn't load pickup availability
Self-Drilling Screw Hex Head 1/4-14 x 1-1/4"
Couldn't load pickup availability
Nylon Cable Tie 11-3/4" Black
Couldn't load pickup availability
Front Bumper Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Metric Indented Hex Head Bolt with 17mm Washer
Couldn't load pickup availability
Product Description
• An all-steel anchor• Use with standard bolts for flush mount applications in concrete or masonry
• Designed to provide high holding strength with relatively shallow embedment depths
1. Drill hole 1/8" deeper than anchor length for flush mounting. Where surface deterioration is present, drill hole slightly deeper to permit anchor to be recessed.
2. Drop anchor into hole. If hole is slightly undersized, tap anchor with hammer until it bottoms in hole.
3. To set expander plug, installation tool can be struck a few sharp blows with a hammer, or an automatic air tool or electric tool can be used.
4. Place fixture in position, insert bolt and tighten.
Technical Specifications
| Item#: | DY09620078 |
|---|---|
| Diameter | 3/4 " |
| Overall Length | 3-1/8 " |
| Thread Pitch | 10 tpi |
| Type | Expansion Drop-In Anchor |
| Drill Size | 1 " |
| Hole Depth | 3-1/4 " |
| Minimum Spacing | 12 " |
| Minimum Edge Distance | 10-1/2 " |
| Allowable Tension (4,000 psi Concrete) | 2,690 lb |
| Allowable Shear (4,000 psi Concrete) | 4,000 lb |
| UNSPSC #: | 31162101 |
| TAA Compliant: | No |
| Weight: | 2.4 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer -
www.P65Warnings.ca.gov
