Bottoming Hand Tap, High Speed Steel, Gold Oxide Finish, 4 Flute, M14 x 2, 1-21/32" Thread Length
(Pack of
1)
SKU:63435 Item#: 63435
• Precision-ground thread design performs better in controlled machine set-ups and tougher off-hand maintenance applications
• Gold oxide finish enhances chip flow
• Minimizes seizing and binding
• Requires less torque
• Produces a more accurate hole
• Sizes permanently marked on all taps
• Manufactured from high-speed steel
• Wear-resistant
• Used in general tapping operations of ferrous and non-ferrous materials
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
Catalog page#: 10-67
Frequently Bought Together
Spot Weld Remover Drill Bit 5/16" (M8)
Couldn't load pickup availability
Spot Weld Remover Drill Bit
Couldn't load pickup availability
Scotch-Brite Roloc Bristle Disc 2"
Couldn't load pickup availability
Carbon Steel Replacement Hand Tap M16 x 1.5
Couldn't load pickup availability
4-Flute HSS Bottoming Hand Tap M4 x 0.7
Couldn't load pickup availability
Carbon Steel Replacement Hand Tap M12 x 1.75
Couldn't load pickup availability
Fender Bumper Shield Retainer 11/16"
Couldn't load pickup availability
Bumper Cover Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Specialty Rivet with Plastic Cap Aluminum 3.2mm
Couldn't load pickup availability
4-Flute HSS Taper Hand Tap 8-32
Couldn't load pickup availability
4-Flute HSS Taper Hand Tap 7/8-14
Couldn't load pickup availability
3-Flute HSS Taper Hand Tap M2.5 x 0.45
Couldn't load pickup availability
Utility Knife, Folding , 4" Closed
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 5/16" (M8)
Couldn't load pickup availability
21-Piece, 1/4" Shank, 2" Hex Power Bit Set
Couldn't load pickup availability
Product Description
• Precision-ground thread design performs better in controlled machine set-ups and tougher off-hand maintenance applications• Gold oxide finish enhances chip flow
• Minimizes seizing and binding
• Requires less torque
• Produces a more accurate hole
• Sizes permanently marked on all taps
• Manufactured from high-speed steel
• Wear-resistant
• Used in general tapping operations of ferrous and non-ferrous materials
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 63435 |
|---|---|
| Type | Metric |
| Style | Bottoming |
| Material | High Speed Steel |
| Diameter | M14 |
| Pitch | 2.0 mm |
| Flutes | 4 |
| Thread Length | 1-21/32 " |
| Recommended Drill Size | 12.0 mm |
| UNSPSC #: | 23241615 |
| TAA Compliant: | Yes |
| Weight: | 0.14 lb |
