4-Flute HSS Taper Hand Tap 8-32
(Pack of
1.0)
• Precision-ground thread design performs better in controlled machine set-ups and tougher off-hand maintenance applications
• Gold oxide finish enhances chip flow
• Minimizes seizing and binding
• Requires less torque
• Produces a more accurate hole
• Sizes permanently marked on all taps
• Manufactured from high-speed steel
• Wear-resistant
• Used in general tapping operations of ferrous and non-ferrous materials
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
Thin Wall Locking Thread Repair Insert Kit 10-24
Couldn't load pickup availability
HD Locking Thread Insert Kit 5/16-20 to 1/2-20
Couldn't load pickup availability
Damaged Screw Remover Extractor #2
Couldn't load pickup availability
Cryotap M10 x 1.5 Metric Taper Hand Tap
Couldn't load pickup availability
Cryotap M7 x 1.0 Metric Plug Hand Tap
Couldn't load pickup availability
Pilotdrive Cryotap M10 x 1.5 Metric Tri-Pak, Taper, Plug, Bottoming
Couldn't load pickup availability
Metric Indented Hex Head Bolt with 17mm Washer
Couldn't load pickup availability
Miniature Incandescent Bulb 12V 2CP
Couldn't load pickup availability
Radiator Grille Nut M4.2-1.41
Couldn't load pickup availability
Carbon Steel Replacement Hand Tap 9/16-18
Couldn't load pickup availability
HSS Combination Drill-Tap 10-24
Couldn't load pickup availability
HSS Combination Drill-Tap 10-24
Couldn't load pickup availability
Blue-Kote II Vented High Density Flap Disc 4-1/2"
Couldn't load pickup availability
Blue-Kote II Vented High Density Flap Disc 4-1/2"
Couldn't load pickup availability
Blue-Kote II Vented High Density Flap Disc 4-1/2"
Couldn't load pickup availability
Product Description
• Precision-ground thread design performs better in controlled machine set-ups and tougher off-hand maintenance applications• Gold oxide finish enhances chip flow
• Minimizes seizing and binding
• Requires less torque
• Produces a more accurate hole
• Sizes permanently marked on all taps
• Manufactured from high-speed steel
• Wear-resistant
• Used in general tapping operations of ferrous and non-ferrous materials
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 60974 |
|---|---|
| Type | Machine Screw |
| Style | Taper |
| Material | High Speed Steel |
| Diameter | #8 |
| Pitch | 32 |
| Flutes | 4 |
| Thread Length | 3/4 " |
| H Limits | GH3 |
| Recommended Drill Size | No. 29 |
| UNSPSC #: | 23241615 |
| TAA Compliant: | Yes |
| Weight: | 0.02 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
