Abrasive Hand Pad Light Duty 6 x 9"
(Pack of
10)
Heavy non-woven material, impregnated with abrasive grain and bonded with synthetic resins
Long-lasting resists tearing, splintering and shedding
Can be used wet or dry
Washable and reusable
Light-Duty use for fine finishing of metals, plastics and fiberglass surfaces, cleaning molds, polishing dies, and rubbing down primer surface coats
Ideal for removing rust and corrosion, and cleaning and preparing surfaces
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Catalog page#: 3-5
Frequently Bought Together

Spot Weld Remover Drill Bit 5/16" (M8)
Couldn't load pickup availability

E-Z Kut Reinforced Abrasive Wheel 3"
Couldn't load pickup availability

Reinforced Mini Cut-Off Wheel 3"
Couldn't load pickup availability

Non-PSA Sandpaper Strip 17-1/2"
Couldn't load pickup availability

Non-PSA Sandpaper Sheet 11"
Couldn't load pickup availability

Wet/Dry Sandpaper 9 x 11"
Couldn't load pickup availability

6"X9" Abrasive Mesh Hand Pad-Very Fine-Maroon Aluminum Oxide
Couldn't load pickup availability

Abrasive Hand Pad Polishing 6 x 9"
Couldn't load pickup availability

Bumper Push-Type Retainer Nylon 18mm
Couldn't load pickup availability

Front Fender Push-Type Retainer Nylon 20mm
Couldn't load pickup availability

Front Fender Liner Push-Type Retainer Nylon 20mm
Couldn't load pickup availability

Razor Blade Single Edge w/Notch
Couldn't load pickup availability

Nutsetter & Bit Set, Magnetic, 22pc
Couldn't load pickup availability

8Pc Metric Flare Nut Wrench Set
Couldn't load pickup availability
Product Description
Heavy non-woven material, impregnated with abrasive grain and bonded with synthetic resins Long-lasting resists tearing, splintering and shedding
Can be used wet or dry
Washable and reusable
Light-Duty use for fine finishing of metals, plastics and fiberglass surfaces, cleaning molds, polishing dies, and rubbing down primer surface coats
Ideal for removing rust and corrosion, and cleaning and preparing surfaces
CAUTION: Protect yourself from product breakage and flying particles. Always wear eye and face protection, and make sure machine guards are in place. Comply with ANSI B7.1.
Technical Specifications
Item#: | 93229 |
---|---|
Type | Light-Duty |
Grain | Silicon Carbide |
Grade | Micro Fine |
Grit | 800 |
Color | Gray |
Length | 9 " |
Width | 6 " |
UNSPSC #: | 31191505 |
TAA Compliant: | Yes |
Weight: | 0.71 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov



