ALLIGATOR® Anchor Nylon #6 to #10
(Pack of
25.0)
Flangeless Anchor
Anti-rotation fins prevent spinning while Alligator Anchor extrudes along screw in solid walls or locks open in hollow walls.
• Ideal for use in a wide variety of materials including concrete, wood, plaster, flakeboard, aerated concrete, brick, masonry, stone, drywall, cinder block, ceramic tile and stucco
Toggler® is a registered trademark of Mechanical Plastics Corp.
Tests are ultimate load. However, industry safety standards recommend 1/4 of the value for actual application. Age and condition of the material and the screw size will cause tensile strength to vary.
Couldn't load pickup availability
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
Frequently Bought Together
Double Expansion Shield Anchor Alloy Steel 5/8"
Couldn't load pickup availability
Masonry Sleeve Anchor Steel 1/4 x 2-1/4"
Couldn't load pickup availability
Masonry Anchor Hex Washer Head Steel 1/4 x 1"
Couldn't load pickup availability
Serrated Hex Flange Nut Alloy Steel M10-1.25
Couldn't load pickup availability
Open End Rivet Dome Head Aluminum 5/32"
Couldn't load pickup availability
Self-Drilling Screw Phillips #10-16 x 3/4"
Couldn't load pickup availability
Bumper Drive Rivet Plastic 10mm Hole
Couldn't load pickup availability
Fender Splash Shield Retainer Nylon 20mm
Couldn't load pickup availability
Molding Clip with Sealer Nylon White 11.5 x 21
Couldn't load pickup availability
Wing-Type Toggle Bolt Anchor Steel 1/4-20 x 6"
Couldn't load pickup availability
Hollow Wall Anchor Setting Tool
Couldn't load pickup availability
Tubular Anchor Plastic White #4 to #6
Couldn't load pickup availability
Product Description
Flangeless AnchorAnti-rotation fins prevent spinning while Alligator Anchor extrudes along screw in solid walls or locks open in hollow walls.
• Ideal for use in a wide variety of materials including concrete, wood, plaster, flakeboard, aerated concrete, brick, masonry, stone, drywall, cinder block, ceramic tile and stucco
Toggler® is a registered trademark of Mechanical Plastics Corp.
Tests are ultimate load. However, industry safety standards recommend 1/4 of the value for actual application. Age and condition of the material and the screw size will cause tensile strength to vary.
Technical Specifications
| Item#: | 62630 |
|---|---|
| Length | 1 5/16 " |
| Type | Alligator |
| Size | 1/4 " |
| Diameter | 1/4 " |
| Material | Nylon |
| Screw Diameter | No. 6 - No. 14 " |
| Drill Size | 1/4 " |
| Anchor Size | 1/4 " |
| Tensile Pull-Out Strength | 2,366 lb |
| UNSPSC #: | 31162103 |
| TAA Compliant: | Yes |
| Weight: | 0.04 lb |
Product Restrictions
California Proposition 65: Not Applicable
www.P65Warnings.ca.gov
