Annular Cutter, 1-7/8" Diameter, 1" Depth of Cut
(Pack of
1)
SKU:15245 Item#: 15245
Steelmax® Annular Cutters reduce horsepower and torque requirements by only cutting the periphery of the hole resulting in a burr-free, reamed-quality hole. As a result, the operation is completed three times faster than costly pilot hole and step drilling. Chip load per tooth is greatly reduced, for high penetration, improved hole quality and longer tool life. The core or “slug” left behind is evidence of this efficient cutting method. Holes on curved surfaces as well as interrupted cuts can be made without distortion.
• Drill holes three times faster than with a twist drill
• Drill on curved surfaces such as pipe or tubing
• Produce reamed-quality, burr-free holes
• Overlap centers on existing holes
• Reduced machine size and horsepower requirements
• Cutters are made from high-performance M2-AL
Individual annular cutters do not come supplied with the center pins. Center pins are required and must be ordered separately.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
CryoBore 9/16" Dia. Annular Cutter, 1-3/16" Cutting Depth
$0.00
Couldn't load pickup availability
CryoBore 1-1/8" Dia. Annular Cutter, 1-3/16" Cutting Depth
$0.00
Couldn't load pickup availability
CryoBore 1-3/16" Dia. Annular Cutter, 2-3/8" Cutting Depth
$0.00
Couldn't load pickup availability
CryoBore 9/16" Dia. Annular Cutter, 1-3/16" Cutting Depth
$0.00
Couldn't load pickup availability
CryoBore 1-1/8" Dia. Annular Cutter, 1-3/16" Cutting Depth
$0.00
Couldn't load pickup availability
CryoBore 1-3/16" Dia. Annular Cutter, 2-3/8" Cutting Depth
$0.00
Couldn't load pickup availability
Polymer Wheel Rubber Eraser 30mm
$0.00
Couldn't load pickup availability
1/8" - 1/2 " Cryonitride Spiral Fluted Step Drill - 1/4" Shank
$0.00
Couldn't load pickup availability
Abrasive Bristle Wire Belt Steel 23mm
$0.00
Couldn't load pickup availability
Bumper Clip Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Front Bumper Drive Rivet Plastic 10mm Hole
$0.00
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
2.1 Round Head Ratchet 1/4 Drive 168 Tooth
$0.00
Couldn't load pickup availability
57Pc Torsion Impact Bit Master Set
$0.00
Couldn't load pickup availability
Master Security Bit Set 203Pc
$0.00
Couldn't load pickup availability
Apollo 2004 Super Glue Adhesive 3g
$0.00
Couldn't load pickup availability
Acid Brush 3/8 x 5-3/4"
$0.00
Couldn't load pickup availability
Twist Knot Wire Wheel 3" Dia., .014" Wire Dia., 1/4" Shank
$0.00
Couldn't load pickup availability
Apollo 2004 Super Glue Adhesive 3g
$0.00
Couldn't load pickup availability
Acid Brush 3/8 x 5-3/4"
$0.00
Couldn't load pickup availability
Twist Knot Wire Wheel 3" Dia., .014" Wire Dia., 1/4" Shank
$0.00
Couldn't load pickup availability
Product Description
Steelmax® Annular Cutters reduce horsepower and torque requirements by only cutting the periphery of the hole resulting in a burr-free, reamed-quality hole. As a result, the operation is completed three times faster than costly pilot hole and step drilling. Chip load per tooth is greatly reduced, for high penetration, improved hole quality and longer tool life. The core or “slug” left behind is evidence of this efficient cutting method. Holes on curved surfaces as well as interrupted cuts can be made without distortion.• Drill holes three times faster than with a twist drill
• Drill on curved surfaces such as pipe or tubing
• Produce reamed-quality, burr-free holes
• Overlap centers on existing holes
• Reduced machine size and horsepower requirements
• Cutters are made from high-performance M2-AL
Individual annular cutters do not come supplied with the center pins. Center pins are required and must be ordered separately.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 15245 |
|---|---|
| Manufacturer Model #: | SM-AC-1875-1 |
| Cutting Diameter | 1-7/8 " |
| Depth of Cut | 1 " |
| Tooth Material | M2-AL |
| UNSPSC #: | 23241600 |
| TAA Compliant: | No |
| Weight: | 0.58 lb |
