Annular Cutter, High-Performance M2-AL, 2" Depth of Cut, 3/4" Diameter
(Pack of
1)
SKU:15259 Item#: 15259
Steelmax® Annular Cutters reduce horsepower and torque requirements by only cutting the periphery of the hole resulting in a burr-free, reamed-quality hole. As a result, the operation is completed three times faster than costly pilot hole and step drilling. Chip load per tooth is greatly reduced, for high penetration, improved hole quality and longer tool life. The core or “slug” left behind is evidence of this efficient cutting method. Holes on curved surfaces as well as interrupted cuts can be made without distortion.
• Drill holes three times faster than with a twist drill
• Drill on curved surfaces such as pipe or tubing
• Produce reamed-quality, burr-free holes
• Overlap centers on existing holes
• Reduced machine size and horsepower requirements
• Cutters are made from high-performance M2-AL
Individual annular cutters do not come supplied with the center pins. Center pins are required and must be ordered separately.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
HSS Annular Cutter 7/16"
Couldn't load pickup availability
CryoBore 1-7/16" Dia. Annular Cutter, 2-3/8" Cutting Depth
Couldn't load pickup availability
9/16" Dia. Annular Cutter, 1" Cutting Depth, Pin Not Included
Couldn't load pickup availability
7/16" Dia. Annular Cutter, 1" Cutting Depth, Pin Not Included
Couldn't load pickup availability
HSS Annular Cutter 1-3/16"
Couldn't load pickup availability
CryoBore 1-1/16" Dia. Annular Cutter, 2-3/8" Cutting Depth
Couldn't load pickup availability
Twist-On Abrasive Disc 3"
Couldn't load pickup availability
Cryobit 1/4" Dia. Maintenance Drill Bit , 135o Split Point, W/ Flats
Couldn't load pickup availability
Eraser Disc Natural Tan 4 x 1"
Couldn't load pickup availability
Miniature Incandescent Bulb 12V 2CP
Couldn't load pickup availability
Metric Indented Hex Head Bolt with 17mm Washer
Couldn't load pickup availability
Radiator Grille Nut M4.2-1.41
Couldn't load pickup availability
Interchangeable Hex Bit Set 24Pc SAE
Couldn't load pickup availability
Scotch-Brite Roloc Bristle Disc 2"
Couldn't load pickup availability
Spot Weld Remover Drill Bit 5/16" (M8)
Couldn't load pickup availability
Reciprocating Saw Blade 6" 8TPI
Couldn't load pickup availability
Slasher Cut-Off Wheel, All Steel, 4 Inch X 1/32 Inch X 3/8 Inch
Couldn't load pickup availability
Slasher Cut-Off Wheel, All Steel, 3 Inch X 1/16 Inch X 3/8 Inch
Couldn't load pickup availability
Reciprocating Saw Blade 6" 8TPI
Couldn't load pickup availability
Slasher Cut-Off Wheel, All Steel, 4 Inch X 1/32 Inch X 3/8 Inch
Couldn't load pickup availability
Slasher Cut-Off Wheel, All Steel, 3 Inch X 1/16 Inch X 3/8 Inch
Couldn't load pickup availability
Product Description
Steelmax® Annular Cutters reduce horsepower and torque requirements by only cutting the periphery of the hole resulting in a burr-free, reamed-quality hole. As a result, the operation is completed three times faster than costly pilot hole and step drilling. Chip load per tooth is greatly reduced, for high penetration, improved hole quality and longer tool life. The core or “slug” left behind is evidence of this efficient cutting method. Holes on curved surfaces as well as interrupted cuts can be made without distortion.• Drill holes three times faster than with a twist drill
• Drill on curved surfaces such as pipe or tubing
• Produce reamed-quality, burr-free holes
• Overlap centers on existing holes
• Reduced machine size and horsepower requirements
• Cutters are made from high-performance M2-AL
Individual annular cutters do not come supplied with the center pins. Center pins are required and must be ordered separately.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 15259 |
|---|---|
| Manufacturer Model #: | SM-AC-0750-2 |
| Cutting Diameter | 3/4 " |
| Depth of Cut | 2 " |
| Tooth Material | M2-AL |
| UNSPSC #: | 23241600 |
| TAA Compliant: | No |
| Weight: | 0.28 lb |
