Annular Cutter, 2-3/8" Diameter, 1" Depth of Cut
(Pack of
1)
SKU:15253 Item#: 15253
Steelmax® Annular Cutters reduce horsepower and torque requirements by only cutting the periphery of the hole resulting in a burr-free, reamed-quality hole. As a result, the operation is completed three times faster than costly pilot hole and step drilling. Chip load per tooth is greatly reduced, for high penetration, improved hole quality and longer tool life. The core or “slug” left behind is evidence of this efficient cutting method. Holes on curved surfaces as well as interrupted cuts can be made without distortion.
• Drill holes three times faster than with a twist drill
• Drill on curved surfaces such as pipe or tubing
• Produce reamed-quality, burr-free holes
• Overlap centers on existing holes
• Reduced machine size and horsepower requirements
• Cutters are made from high-performance M2-AL
Individual annular cutters do not come supplied with the center pins. Center pins are required and must be ordered separately.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Frequently Bought Together
HSS Annular Cutter 11/16"
$0.00
Couldn't load pickup availability
CryoBore 15/16" Dia. Annular Cutter, 2-3/8" Cutting Depth
$0.00
Couldn't load pickup availability
High-Performance M2-AL Annular Cutter 9/16"
$0.00
Couldn't load pickup availability
HSS Annular Cutter 1-1/4"
$0.00
Couldn't load pickup availability
HSS Annular Cutter 11/16"
$0.00
Couldn't load pickup availability
CryoBore 15/16" Dia. Annular Cutter, 2-3/8" Cutting Depth
$0.00
Couldn't load pickup availability
Cryoslash 3-5/8" x 1/2" x 0.025" Air Saw Blade 24 TPI
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 3" (M10)
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 5/16" (M8)
$0.00
Couldn't load pickup availability
Front Bumper Drive Rivet Plastic 10mm Hole
$0.00
Couldn't load pickup availability
Front Bumper Drive Rivet Plastic 7mm Hole
$0.00
Couldn't load pickup availability
Front Bumper Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
9" Hi-Level Heavy-Duty Power Jaw Plier-Cutter
$0.00
Couldn't load pickup availability
11Pc Lock and Load Hammer Set
$0.00
Couldn't load pickup availability
Spinning Handmaster Driver Set 5Pc Set
$0.00
Couldn't load pickup availability
Hinge Pin and Bushing Kit 4 Items 7Pcs
$0.00
Couldn't load pickup availability
Bumper and Lower Deflector Specialty Rivet 4.8mm
$0.00
Couldn't load pickup availability
Rocker and Quarter Molding Retainer Plastic
$0.00
Couldn't load pickup availability
Hinge Pin and Bushing Kit 4 Items 7Pcs
$0.00
Couldn't load pickup availability
Bumper and Lower Deflector Specialty Rivet 4.8mm
$0.00
Couldn't load pickup availability
Rocker and Quarter Molding Retainer Plastic
$0.00
Couldn't load pickup availability
Product Description
Steelmax® Annular Cutters reduce horsepower and torque requirements by only cutting the periphery of the hole resulting in a burr-free, reamed-quality hole. As a result, the operation is completed three times faster than costly pilot hole and step drilling. Chip load per tooth is greatly reduced, for high penetration, improved hole quality and longer tool life. The core or “slug” left behind is evidence of this efficient cutting method. Holes on curved surfaces as well as interrupted cuts can be made without distortion.• Drill holes three times faster than with a twist drill
• Drill on curved surfaces such as pipe or tubing
• Produce reamed-quality, burr-free holes
• Overlap centers on existing holes
• Reduced machine size and horsepower requirements
• Cutters are made from high-performance M2-AL
Individual annular cutters do not come supplied with the center pins. Center pins are required and must be ordered separately.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 15253 |
|---|---|
| Manufacturer Model #: | SM-AC-2375-1 |
| Cutting Diameter | 2-3/8 " |
| Depth of Cut | 1 " |
| Tooth Material | M2-AL |
| UNSPSC #: | 23241600 |
| TAA Compliant: | No |
| Weight: | 0.77 lb |
