Band-It Clamp, Galvanized High-Carbon Steel, 5" ID, 5/8" Width, 1/32" Thickness
(Pack of
10)
• Made of high-carbon electrolytic galvanized steel to resist corrosion• 1/32" thick band
• Designed for industrial and production equipment
1. Insert clamp in tool, then insert wrench assembly. If you prefer, install wrench assembly before clamp is inserted.2. Start pumping ratchet wrench forward until proper tension has been applied.3. Place punch on clamp buckle and, while holding tension with ratchet wrench, lock clamp by striking punch with hammer until clamp is tight.4. While holding tension with wrench, swing tool up against buckle, then backward to break off clamp tail. To loosen clamp tail, wind until tail is free. Remove mandrel-wrench assembly.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
One-Ear Stepless Hose Clamp 304 SS 0.228 to 0.275"
Couldn't load pickup availability
Constant Tension Hose Clamp 301 SS 5/8 to 15/16"
Couldn't load pickup availability
Super 77 Hose Clamp SS 3-1/2 to 4-3/8"
Couldn't load pickup availability
Vacuum Hose Connector Straight 1/4 x 1/4"
Couldn't load pickup availability
Vacuum Hose Connector Straight 3/16 x 3/16"
Couldn't load pickup availability
Fuel Line Hose 1/4" ID x 25'
Couldn't load pickup availability
Band-It Clamp Basic Ratchet Tool 3/8-5/8 9-3/4"
Couldn't load pickup availability
Band-It Clamp High-Carbon Steel 1-3/4 x 5/8"
Couldn't load pickup availability
Super 77 Hose Clamp SS 5/8 to 1-1/4"
Couldn't load pickup availability
Industrial O-Ring Viton 5-1/8 x 5-3/8 x 1/8"
Couldn't load pickup availability
Super 77 Miniature Hose Clamp SS 5/16 to 7/8"
Couldn't load pickup availability
DOT Union Tee Nylon 1/4 x 1/4 x 1/4"
Couldn't load pickup availability
Front Bumper Drive Rivet Plastic 10mm Hole
Couldn't load pickup availability
Front Bumper Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Molding Clip with Sealer Nylon White 11.5 x 21
Couldn't load pickup availability
Product Description
• Made of high-carbon electrolytic galvanized steel to resist corrosion• 1/32" thick band• Designed for industrial and production equipment
1. Insert clamp in tool, then insert wrench assembly. If you prefer, install wrench assembly before clamp is inserted.2. Start pumping ratchet wrench forward until proper tension has been applied.3. Place punch on clamp buckle and, while holding tension with ratchet wrench, lock clamp by striking punch with hammer until clamp is tight.4. While holding tension with wrench, swing tool up against buckle, then backward to break off clamp tail. To loosen clamp tail, wind until tail is free. Remove mandrel-wrench assembly.
Technical Specifications
| Item#: | 81803 |
|---|---|
| Category | Band-It Clamp |
| Applications | Industrial Hose Assemblies and General Applications |
| Material | Galvanized High-Carbon Steel |
| Size | 5 " |
| I.D. | 5 " |
| Minimum Diameter | 5 " |
| Band Width | 5/8 " |
| Width | 5/8 " |
| Thickness | 1/32 " |
| UNSPSC #: | 31162906 |
| TAA Compliant: | Yes |
| Weight: | 2.03 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
