Chatterless Countersink 90° Six Flute 1/2"
(Pack of
1.0)
Centerline Angle 45°, Included Angle 90°
• Staggered cutting edges inhibit the occurrence of resonant or harmonic vibration
• No break-in period required
• Made of M2 high-speed steel
• Made in USA
45° Centerline Angle
• Can be used in drill presses, screw machines, automatics, lathes, hand tools or special set-ups
NOTE: Use of a good quality cutting fluid is recommended.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
Cryocut 3/16" Body Dia. 90o Angle Countersink, 1-Flute
Couldn't load pickup availability
Chatterless Countersink 90° Six Flute 3/16"
Couldn't load pickup availability
Chatterless Countersink Kit 4Pcs 90° Six Flute
Couldn't load pickup availability
Countersink 82° Single Flute 3/16"
Couldn't load pickup availability
Zirconium Grain Locking Grinding Disc 2"
Couldn't load pickup availability
2" Grey Finger Disc - 120 Grit
Couldn't load pickup availability
Twist Knot Wire Wheel 3" Dia., .014" Wire Dia., 1/4" Shank
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 1/8"
Couldn't load pickup availability
Nylon Cable Tie 11-3/4" Black
Couldn't load pickup availability
Rocker Molding Clip with Sealer Nylon Gray 12mm
Couldn't load pickup availability
M2 Sheet Metal Hole Cutter 3/8"
Couldn't load pickup availability
Razor Blade Plastic
Couldn't load pickup availability
Reinforced Mini Cut-Off Wheel 3"
Couldn't load pickup availability
Product Description
Centerline Angle 45°, Included Angle 90°• Staggered cutting edges inhibit the occurrence of resonant or harmonic vibration
• No break-in period required
• Made of M2 high-speed steel
• Made in USA
45° Centerline Angle
• Can be used in drill presses, screw machines, automatics, lathes, hand tools or special set-ups
NOTE: Use of a good quality cutting fluid is recommended.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 57148 |
|---|---|
| Type | Countersink |
| Body Diameter | 1/2 " |
| Flutes | Six |
| Included Angle | 90 ° |
| Centerline Angle | 45 ° |
| Shank Size | 3/8 " |
| Shank Length | 1 " |
| Overall Length | 2 " |
| For Screw Size | No. 6 - No. 12 |
| Maximum RPM (Aluminum) | 1,060 RPM |
| Maximum RPM (Cast Iron or Mild Steel) | 530 RPM |
| Material | M2 High Speed Steel |
| UNSPSC #: | 23241603 |
| TAA Compliant: | Yes |
| Weight: | 0.09 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
