Chatterless Countersink, High Speed Steel, 90° Six Flute, 850RPM, 5/8 x 2-5/16"
(Pack of
1)
SKU:57150 Item#: 57150
Centerline Angle 45°, Included Angle 90°
• Staggered cutting edges inhibit the occurrence of resonant or harmonic vibration
• No break-in period required
• Made of M2 high-speed steel
• Made in USA
45° Centerline Angle
• Can be used in drill presses, screw machines, automatics, lathes, hand tools or special set-ups
NOTE: Use of a good quality cutting fluid is recommended.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
Chatterless Countersink 90° Six Flute 1/4"
$0.00
Couldn't load pickup availability
Cryocut 1/8" Body Dia. 90o Angle Countersink, 1-Flute
$0.00
Couldn't load pickup availability
Cryocut 3/4" Body Dia. 90o Angle Countersink, 3-Flute
$0.00
Couldn't load pickup availability
Cryocut 1" Body Dia. 100o Angle Countersink, 3-Flute
$0.00
Couldn't load pickup availability
Cryocut 3/4" Body Dia. 100o Angle Countersink, 3-Flute
$0.00
Couldn't load pickup availability
Cryocut 1-1/4" Body Dia. 100o Angle Countersink, 3-Flute
$0.00
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 3/16"
$0.00
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 1/4"
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 2-3/4" (M8)
$0.00
Couldn't load pickup availability
Cowl Bumper Fender Liner/Engine Under Cover Rivet
$0.00
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
Drive Rivet Nylon M8
$0.00
Couldn't load pickup availability
Cross-Over Socket Extension Set, 3/8" Drive, 3 Piece
$0.00
Couldn't load pickup availability
Utility Knife, Folding , 4" Closed
$0.00
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 3/16"
$0.00
Couldn't load pickup availability
Product Description
Centerline Angle 45°, Included Angle 90°• Staggered cutting edges inhibit the occurrence of resonant or harmonic vibration
• No break-in period required
• Made of M2 high-speed steel
• Made in USA
45° Centerline Angle
• Can be used in drill presses, screw machines, automatics, lathes, hand tools or special set-ups
NOTE: Use of a good quality cutting fluid is recommended.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 57150 |
|---|---|
| Type | Countersink |
| Body Diameter | 5/8 " |
| Flutes | Six |
| Included Angle | 90 ° |
| Centerline Angle | 45 ° |
| Shank Size | 3/8 " |
| Shank Length | 1-1/8 " |
| Overall Length | 2-5/16 " |
| For Screw Size | No. 8 - 1/4 |
| Maximum RPM (Aluminum) | 850 RPM |
| Maximum RPM (Cast Iron or Mild Steel) | 420 RPM |
| Material | M2 High Speed Steel |
| UNSPSC #: | 23241603 |
| TAA Compliant: | Yes |
| Weight: | 0.14 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
