Chatterless Countersink, High Speed Steel, 90° Six Flute, 2130RPM, 1/4 x 2"
(Pack of
1)
SKU:57142 Item#: 57142
Centerline Angle 45°, Included Angle 90°
• Staggered cutting edges inhibit the occurrence of resonant or harmonic vibration
• No break-in period required
• Made of M2 high-speed steel
• Made in USA
45° Centerline Angle
• Can be used in drill presses, screw machines, automatics, lathes, hand tools or special set-ups
NOTE: Use of a good quality cutting fluid is recommended.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
Cryocut 1-1/4" Body Dia. 90o Angle Countersink, 3-Flute
$0.00
Couldn't load pickup availability
Cryocut 1" Body Dia. 90o Angle Countersink, 3-Flute
$0.00
Couldn't load pickup availability
Chatterless Countersink 90° Six Flute 5/16"
$0.00
Couldn't load pickup availability
Chatterless Countersink 90° Six Flute 3/8"
$0.00
Couldn't load pickup availability
Cryocut 5/8" Body Dia. 82o Angle Countersink, 3-Flute
$0.00
Couldn't load pickup availability
Cryocut 3/4" Body Dia. 82o Angle Countersink, 3-Flute
$0.00
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 5/16" (M8)
$0.00
Couldn't load pickup availability
Twist-On Abrasive Disc 2"
$0.00
Couldn't load pickup availability
Stemmed Knot-Type Wire Wheel 3"
$0.00
Couldn't load pickup availability
Air Distributor Defroster Push-Type Retainer
$0.00
Couldn't load pickup availability
Fender Liner Screw Grommet Nylon M5.5
$0.00
Couldn't load pickup availability
Molding Clip with Sealer Nylon White 10 x 12mm
$0.00
Couldn't load pickup availability
2Pc Index-Tend Pry Bar Set
$0.00
Couldn't load pickup availability
Alu-Master 8-Way Torpedo Level
$0.00
Couldn't load pickup availability
18" Locking Smooth Operator Clamp
$0.00
Couldn't load pickup availability
Product Description
Centerline Angle 45°, Included Angle 90°• Staggered cutting edges inhibit the occurrence of resonant or harmonic vibration
• No break-in period required
• Made of M2 high-speed steel
• Made in USA
45° Centerline Angle
• Can be used in drill presses, screw machines, automatics, lathes, hand tools or special set-ups
NOTE: Use of a good quality cutting fluid is recommended.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 57142 |
|---|---|
| Type | Countersink |
| Body Diameter | 1/4 " |
| Flutes | Six |
| Included Angle | 90 ° |
| Centerline Angle | 45 ° |
| Shank Size | 1/4 " |
| Shank Length | 13/16 " |
| Overall Length | 2 " |
| For Screw Size | No. 0 - No. 3 |
| Maximum RPM (Aluminum) | 2,130 RPM |
| Maximum RPM (Cast Iron or Mild Steel) | 1,060 RPM |
| Material | M2 High Speed Steel |
| UNSPSC #: | 23241603 |
| TAA Compliant: | Yes |
| Weight: | 0.05 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
