Colorstar Solution-Dyed Interior Mat, Slate Gray, 4' Wide x 8' Long
(Pack of
1)
SKU:1317634 Item#: 1317634
ColorStar mat features solution dyed nylon yarn. Solution Dyed nylon yarn offers superior color fastness and resistance to UV exposure. In addition to these benefits, these mats have a built-in anti-static feature to provide permanent protection against harmful static electricity..
FEATURES
• 10 year color-loss guarantee with Indoor use. Mats won't fade due to cleaning.
• Extra course solution-dyed nylon fibers in combination with traditional solution-dyed fibers create excellent scraping and wiping action for maximum soil stopping power.
• Twisted heat-set 100% static-dissipative nylon resists crushing, traps dirt better and extends performance life.
• Green friendly rubber backing has 20% recycled rubber content.
• Certified slip-resistant by the National Floor Safety Institute.
• Recommended uses malls, banks, hotels, offices, restaurants, healthcare, supermarkets and more.
• SURFACE FIBER TYPE: Solution-dyed BCF 2 ply continuous filament nylon, type 6.0,5^½ twist output, heat set.
• WEIGHT: 20 ozs./sy/
• PILE HEIGHT: 3/8"
• GAUGE: 5/32"
• CONSTRUCTION: Cut Pile
• BACKING
• TYPE: 100% SBR Nitrile Rubber (20% Recycled Content)
• THICKNESS: .060"- SBR Rubber
• DUROMETER: 65
• TENSIL: SBR Rubber = 1400 PSI; Nitrile Rubber = 1800 PSI
• TESTING
• Passes Flammability Standard DOC-FF-1-70
• ASTM C 1028-29 Static Coefficient of Friction. Dry 70
• Anti-Static maximum average voltage of 1.6 KV as measured by the AATCC 134 Electrostatic Propensity Test and meets IBM’s minimum standard for electrical resistance (NFPA99).
1. Vacuum Daily
•When possible, mats should be vacuumed on a daily basis. During periods of inclement weather, use of a wet/dry vacuum may provide a more effective method of daily maintenance.
2. Routine Maintenance
•Spots and non-permanent stains should be removed as needed using a safe non-organic solvent based cleaner. In the event a solvent based spotter is needed, caution should be taken to rinse the excess solvent thoroughly before returning the mat to service. Failure to rinse the solvent can result in damage to the rubber backing of the mat. Periodically, as needed, mats should be cleaned using a more vigorous method such as a pressure washer or water hose. Following the use of this method, the mats should be placed in a position to allow them to drain. This draining will occur rapidly and the mats will be ready to put back into service in a short time.
3. Deep Cleaning
•Mats may be cleaned by any routine method used for carpeted floors. This includes wet extraction as well as low moisture extraction methods. Chemicals used for cleaning should be as solvent-free as possible and following a wet cleaning, care should be taken to rinse the mat as thoroughly as possible. If a wet system is used, the mats should be placed in a position to drain as much as possible before returning to service.
4. Floor Preparation
•Prior to the mat being put back into service, it's recommended that the floor where the mat will be placed be cleaned to remove dust and dirt. This will allow the mat to grip the floor more effectively reducing mat movement with traffic.
Frequently Bought Together
Front Fender Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Fender and Bumper Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Rocker Molding Clip with Sealer Nylon Blue 17mm
$0.00
Couldn't load pickup availability
Product Description
ColorStar mat features solution dyed nylon yarn. Solution Dyed nylon yarn offers superior color fastness and resistance to UV exposure. In addition to these benefits, these mats have a built-in anti-static feature to provide permanent protection against harmful static electricity..FEATURES
• 10 year color-loss guarantee with Indoor use. Mats won't fade due to cleaning.
• Extra course solution-dyed nylon fibers in combination with traditional solution-dyed fibers create excellent scraping and wiping action for maximum soil stopping power.
• Twisted heat-set 100% static-dissipative nylon resists crushing, traps dirt better and extends performance life.
• Green friendly rubber backing has 20% recycled rubber content.
• Certified slip-resistant by the National Floor Safety Institute.
• Recommended uses malls, banks, hotels, offices, restaurants, healthcare, supermarkets and more.
• SURFACE FIBER TYPE: Solution-dyed BCF 2 ply continuous filament nylon, type 6.0,5^½ twist output, heat set.
• WEIGHT: 20 ozs./sy/
• PILE HEIGHT: 3/8"
• GAUGE: 5/32"
• CONSTRUCTION: Cut Pile
• BACKING
• TYPE: 100% SBR Nitrile Rubber (20% Recycled Content)
• THICKNESS: .060"- SBR Rubber
• DUROMETER: 65
• TENSIL: SBR Rubber = 1400 PSI; Nitrile Rubber = 1800 PSI
• TESTING
• Passes Flammability Standard DOC-FF-1-70
• ASTM C 1028-29 Static Coefficient of Friction. Dry 70
• Anti-Static maximum average voltage of 1.6 KV as measured by the AATCC 134 Electrostatic Propensity Test and meets IBM’s minimum standard for electrical resistance (NFPA99).
1. Vacuum Daily
•When possible, mats should be vacuumed on a daily basis. During periods of inclement weather, use of a wet/dry vacuum may provide a more effective method of daily maintenance.
2. Routine Maintenance
•Spots and non-permanent stains should be removed as needed using a safe non-organic solvent based cleaner. In the event a solvent based spotter is needed, caution should be taken to rinse the excess solvent thoroughly before returning the mat to service. Failure to rinse the solvent can result in damage to the rubber backing of the mat. Periodically, as needed, mats should be cleaned using a more vigorous method such as a pressure washer or water hose. Following the use of this method, the mats should be placed in a position to allow them to drain. This draining will occur rapidly and the mats will be ready to put back into service in a short time.
3. Deep Cleaning
•Mats may be cleaned by any routine method used for carpeted floors. This includes wet extraction as well as low moisture extraction methods. Chemicals used for cleaning should be as solvent-free as possible and following a wet cleaning, care should be taken to rinse the mat as thoroughly as possible. If a wet system is used, the mats should be placed in a position to drain as much as possible before returning to service.
4. Floor Preparation
•Prior to the mat being put back into service, it's recommended that the floor where the mat will be placed be cleaned to remove dust and dirt. This will allow the mat to grip the floor more effectively reducing mat movement with traffic.
Technical Specifications
| Item#: | 1317634 |
|---|---|
| Manufacturer Model #: | 125 |
| Size | 4 x 8 ft |
| Color | Slate Grey |
| Style | Colorstar |
| Length | 8 ft |
| Width | 4 ft |
| Weight | 19 lb |
| Shape | Rectangular |
| Backing Material | SBR Rubber |
| Backing Style | Smooth |
| Border Style | Rubber |
| Type | Safety Matting |
| Applications | Indoor Wiper Mat |
| Quantity Per Package | 1.0000 |
| UNSPSC #: | 52101508 |
| TAA Compliant: | Yes |
