Countersink 82° Single Flute 9/16"
(Pack of
1)
• 82° included angle
• Single cutting edge provides fast stock removal; finishes chatter-free
• Finish reduces chip build-up on cutting edge
• Recommended RPM is half the nominal drilling speed
• Designed for general-purpose countersinking, chamfering or deburring
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
Countersink 82° Single Flute 1-1/8"
Couldn't load pickup availability
Chatterless Countersink 82° Single Flute 3/16"
Couldn't load pickup availability
Cryocut 1" Body Dia. 82o Angle Countersink, 3-Flute
Couldn't load pickup availability
Cryocut 1-1/4" Body Dia. 90o Angle Countersink, 3-Flute
Couldn't load pickup availability
Chatterless Countersink 82° Six Flute 3/4"
Couldn't load pickup availability
Countersink Drill Bit 5/64"
Couldn't load pickup availability
Spot Weld Remover Drill Bit 5/16" (M8)
Couldn't load pickup availability
E-Z Kut Reinforced Abrasive Wheel 3"
Couldn't load pickup availability
Abrasive Hand Pad Commercial Grade 6 x 9"
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
Couldn't load pickup availability
Bumper Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Metric Indented Hex Head Bolt with 17mm Washer
Couldn't load pickup availability
8Pc Metric Flare Nut Wrench Set
Couldn't load pickup availability
Scotch-Brite Roloc Bristle Disc 2"
Couldn't load pickup availability
Spot Weld Remover Drill Bit Cobalt 5/16" (M8)
Couldn't load pickup availability
Product Description
• 82° included angle• Single cutting edge provides fast stock removal; finishes chatter-free
• Finish reduces chip build-up on cutting edge
• Recommended RPM is half the nominal drilling speed
• Designed for general-purpose countersinking, chamfering or deburring
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 97622 |
|---|---|
| Type | Countersink |
| Body Diameter | 9/16 " |
| Flutes | Single |
| Included Angle | 82 ° |
| Shank Size | 1/4 " |
| Overall Length | 2 " |
| For Screw Size | No. 2 - 1/4 " |
| Cutting Diameter Min. | 0.19 " |
| Cutting Diameter Max. | 0.53 " |
| UNSPSC #: | 23241603 |
| TAA Compliant: | Yes |
| Weight: | 0.05 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
