Chatterless Countersink, High Speed Steel, 82° Six Flute, 1060RPM, 1/4 x 2"
(Pack of
1)
SKU:57141 Item#: 57141
Centerline Angle 41°, Included Angle 82°
• Staggered cutting edges inhibit the occurrence of resonant or harmonic vibration
• No break-in period required
• Made of M2 high-speed steel
• Made in USA
41° Centerline Angle
• Can be used in drill presses, screw machines, automatics, lathes, hand tools or special set-ups
NOTE: Use of a good quality cutting fluid is recommended.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
Countersink 82° Single Flute 5/8"
Couldn't load pickup availability
Countersink 82° Single Flute 7/16"
Couldn't load pickup availability
Chatterless Countersink 82° Six Flute 3/4"
Couldn't load pickup availability
Chatterless Countersink 82° Six Flute 1"
Couldn't load pickup availability
Chatterless Countersink 82° Six Flute 5/16"
Couldn't load pickup availability
Chatterless Countersink 90° Six Flute 5/8"
Couldn't load pickup availability
Spot Weld Remover Drill Bit 5/16" (M8)
Couldn't load pickup availability
Twist-On Abrasive Disc 2"
Couldn't load pickup availability
Spot Weld Remover Drill Bit HSS 2-3/4" (M8)
Couldn't load pickup availability
Push-Type Retainer Nylon 16 x 19mm
Couldn't load pickup availability
Bumper Radiator and Grille Drive Rivet 7mm Hole
Couldn't load pickup availability
Inner Fender Shield Attaching Clip Nylon Black
Couldn't load pickup availability
7" Auto-Adjust Pliers
Couldn't load pickup availability
Sheet Metal Drill Bit Alloy Steel 1/4"
Couldn't load pickup availability
Alu-Master 8-Way Torpedo Level
Couldn't load pickup availability
Product Description
Centerline Angle 41°, Included Angle 82°• Staggered cutting edges inhibit the occurrence of resonant or harmonic vibration
• No break-in period required
• Made of M2 high-speed steel
• Made in USA
41° Centerline Angle
• Can be used in drill presses, screw machines, automatics, lathes, hand tools or special set-ups
NOTE: Use of a good quality cutting fluid is recommended.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 57141 |
|---|---|
| Type | Countersink |
| Body Diameter | 1/4 " |
| Flutes | Six |
| Included Angle | 82 ° |
| Shank Size | 1/4 " |
| Shank Length | 13/16 " |
| Overall Length | 2 " |
| For Screw Size | No. 0 - No. 3 |
| Maximum RPM (Aluminum) | 2,130 RPM |
| Maximum RPM (Cast Iron or Mild Steel) | 1,060 RPM |
| Centerline Angle | 41 ° |
| UNSPSC #: | 23241603 |
| TAA Compliant: | Yes |
| Weight: | 0.03 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
