Countersink 82° Single Flute 7/16"
(Pack of
1.0)
• 82° included angle
• Single cutting edge provides fast stock removal; finishes chatter-free
• Finish reduces chip build-up on cutting edge
• Recommended RPM is half the nominal drilling speed
• Designed for general-purpose countersinking, chamfering or deburring
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
Countersink 82° Single Flute 1-1/8"
Couldn't load pickup availability
Chatterless Countersink 82° Single Flute 3/16"
Couldn't load pickup availability
Cryocut 1" Body Dia. 82o Angle Countersink, 3-Flute
Couldn't load pickup availability
Cryocut 1-1/4" Body Dia. 90o Angle Countersink, 3-Flute
Couldn't load pickup availability
Chatterless Countersink 82° Six Flute 3/4"
Couldn't load pickup availability
Countersink Drill Bit 5/64"
Couldn't load pickup availability
Curved Wood Handle Scratch Brush
Couldn't load pickup availability
Cryobit 1/4" Dia. Maintenance Drill Bit , 135o Split Point, W/ Flats
Couldn't load pickup availability
Twist-On Abrasive Disc 2"
Couldn't load pickup availability
Bumper Push-Type Retainer Nylon 18mm
Couldn't load pickup availability
Drive Rivet Nylon M8
Couldn't load pickup availability
Metric Indented Hex Head Bolt with 17mm Washer
Couldn't load pickup availability
Large Index-Tend Pry Bar
Couldn't load pickup availability
Cordless Right Angle Grinder Charging Bundle
Couldn't load pickup availability
Aluminum Oxide Grain Locking Grinding Disc 2"
Couldn't load pickup availability
Product Description
• 82° included angle• Single cutting edge provides fast stock removal; finishes chatter-free
• Finish reduces chip build-up on cutting edge
• Recommended RPM is half the nominal drilling speed
• Designed for general-purpose countersinking, chamfering or deburring
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | 97621 |
|---|---|
| Type | Countersink |
| Body Diameter | 7/16 " |
| Flutes | Single |
| Included Angle | 82 ° |
| Shank Size | 1/4 " |
| Overall Length | 2 " |
| For Screw Size | No. 1 - No. 10 |
| Cutting Diameter Min. | 0.15 " |
| Cutting Diameter Max. | 0.40 " |
| UNSPSC #: | 23241603 |
| TAA Compliant: | Yes |
| Weight: | 0.05 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
