Cryobit #30 Dia. T-Bit, 1-1/4" Short Shank Length, 1/4"-28 Thread,Bulk
(Pack of
12)
SKU:DY80824830 Item#: DY80824830
• Enables standard drill motors to reach into areas with at least 2" of clearance
• Provides easy access to hard-to-reach areas
• Can be used with flex shaft snakes and right angle tool for drilling in tight spaces, extending a drill bit for more reach, or using small abrasives to grind, cut, sand or brush
• Drill bits meet the latest NAS 907 aircraft standards and are Cryophase™ treated for maximum life and durability
Specifications
• Material: Aircraft quality molybdenum tool steel
• Hardness: 63-65Rc
• Aircraft Specifications: Meets NAS 907
• Cryophase™: Thermal cycling cryogenic treatment
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Couldn't load pickup availability
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Frequently Bought Together
Spot Weld Remover Drill Bit 5/16" (M8)
$0.00
Couldn't load pickup availability
Abrasive Bristle Wire Belt Steel 23mm
$0.00
Couldn't load pickup availability
Polymer Wheel Rubber Eraser 30mm
$0.00
Couldn't load pickup availability
Cryobit #40 Dia. T-Bit, 1-1/4" Short Shank Length, 1/4"-28 Thread
$0.00
Couldn't load pickup availability
Cryobit #40 Dia. T-Bit, 1-1/4" Short Shank Length, 1/4"-28 Thread,Bulk
$0.00
Couldn't load pickup availability
Cryobit Drill Bit T Bit Stubby
$0.00
Couldn't load pickup availability
Ceramic Grain Mini Cut-Off Wheel 4"
$0.00
Couldn't load pickup availability
Reinforced Mini Cut-Off Wheel 3"
$0.00
Couldn't load pickup availability
Reinforced Mini Cut-Off Wheel 4"
$0.00
Couldn't load pickup availability
Bumper Clip Push-Type Retainer Nylon 18mm
$0.00
Couldn't load pickup availability
Front Bumper Trim Panel/Running Board Split Rivet
$0.00
Couldn't load pickup availability
Front Fender Push-Type Retainer Nylon 20mm
$0.00
Couldn't load pickup availability
10" Forman's Favorite Heavy-Duty Copper & Aluminum Cable Cutter Pliers
$0.00
Couldn't load pickup availability
Double Flute Step Drill Bit 1/8 to 1/2"
$0.00
Couldn't load pickup availability
Small Index-Tend Pry Bar
$0.00
Couldn't load pickup availability
Product Description
• Enables standard drill motors to reach into areas with at least 2" of clearance• Provides easy access to hard-to-reach areas
• Can be used with flex shaft snakes and right angle tool for drilling in tight spaces, extending a drill bit for more reach, or using small abrasives to grind, cut, sand or brush
• Drill bits meet the latest NAS 907 aircraft standards and are Cryophase™ treated for maximum life and durability
Specifications
• Material: Aircraft quality molybdenum tool steel
• Hardness: 63-65Rc
• Aircraft Specifications: Meets NAS 907
• Cryophase™: Thermal cycling cryogenic treatment
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.
Technical Specifications
| Item#: | DY80824830 |
|---|---|
| Type | Short Shank Drill for T-Bit Tool |
| Diameter | #30 |
| Flute Length | 1-1/4 " |
| Shank Size | 1/4-28 " |
| UNSPSC #: | 23241611 |
| TAA Compliant: | No |
| Weight: | 0.14 lb |
Product Restrictions
California Proposition 65: WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
